BENELLI M4 Bolt Assist Device MOD 2 now in stock

[badboybeeson]

Now in Stock and shipping to dealers tomorrow

BENELLI M4 Bolt Assist Device MOD 2
"BAD TAB "
$24.99
https://www.sjhardware.com/product/benelli-m4-bolt-assist-device-mod-2/

Made from spring steel that has been post production cycle heat treated to give the correct amount of spring tension as well as min 500.000 cycle longevity.

Zinc plated and then cerakoted graphite black.

We also incorporated and over travel tab on the one end as with our T&E we saw this as a defect.

MOD 2 has laser cut diamond checkering to add texture

90 in stock

[hardgoodbye]

Does this require any permanent modification of the firearm?

[Armourall]

Looks to me that you have to cut a piece out of the foregrip. Not gonna happen on mine. Maybe a Turkish wannabe but not on my real deal Benelli.

[hollowedpoint]

I put mine on with no modifications at all to the gun. It just clips to the hand guard retaining ring.

[Bucket84]

Looks to me that you have to cut a piece out of the foregrip. Not gonna happen on mine. Maybe a Turkish wannabe but not on my real deal Benelli.

You don't have to. The right handguard just doesn't have perfect fit/finish after install (out by the thickness of the tab, 1/16", hardly noticeable). Yes you can cut a little notch in the handguard to make it fit perfectly. The only other option for a big bolt release requires disassembly, drilling, tapping, threading, and reassembly. Pick your poison...

[badboybeeson]

As others have posted. No mods needed

[danastles]

Does this fit the m2 tactical?

[maifire]

Does it end rubbing/scraping the receiver at the butt end of it?

[badboybeeson]

Does it end rubbing/scraping the receiver at the butt end of it?

It does touch the frame so with enough use it may mark it.

[Bucket84]

I have Mod 1. Yes it does leave a little mark on the receiver. I noticed it after only 20 uses maybe. I stopped this with a little piece of electrical tape on the "butt end", or as S&J calls it, the "over travel tab".

I think this problem could be eliminated by having the over travel tab curved like the other side, or some gentle bend instead of the abrupt 90 degree sharp corner.