I'm at my wits end.....how do I remove the dust cover from my MS ?

[LeadMonkey]

We would be happy to measure your pins with our Mitutoyo Quantum digital micrometer, capable of accurately resolving 0.00005" (50 millionths of an inch), calibrated with precision gauge blocks to +/- 10 millionths of an inch at 21 degrees C.

Good lord, I feel like now I need one of those! Source?

[russ.ackland]

Good lord, I feel like now I need one of those! Source?

Canada ammo maybe

[Taurkon]

I just want to know if you got the dust cover off yet...

[45C]

Good lord, I feel like now I need one of those! Source?

Try BCL,apparently that's why their tolerances were so tight...

[Uisge]

I just want to know if you got the dust cover off yet...

He did.

[ATRS Shaun]

Good lord, I feel like now I need one of those! Source?

If you're serious, send us an email to info@albertatacticalrifle.com and we can order one for you.

[CP 5.3]

Youtube.

[$kull]

Get a towel
Put on a flat surface thats very stable (a rubber tire layed down with towel over it is really good, so you wont damage the upper)
Slam upper with the pin and hole facing down (slam on the threads basically) let inertia knock the pin down a little

Then grab with pliers after some of it comes out.

You may want to get some very thin lube in there with the pin also

[sbe]

I just did this with a dead blow hammer, hitting front of reciever-worked fine.

[Razer]

If you're serious, send us an email to info@albertatacticalrifle.com and we can order one for you.

Amazon Prime?