***PRE-ORDER ONLY***
Estimated Delivery of First batch 31 AUG 2020. (full)
Estimated delivery of Second batch 30 SEP 2020
The MRA Renegade Receiver Set is a novel, spring assisted, straight pull, magazine fed firearm design.# It is composed of a proprietary Receiver, Bottom Metal, and proprietary bolt carrier with integrated, swap-able left or right hand charging handle.# This receiver kit is compatible with a wide variety of commonly available firearm parts and accessories.# In this way, the user can build a rifle to meet their specific utility and budget.
This receiver set is designed and intended to not be capable of discharging ammunition in a semi-automatic fashion.# The design is novel and is not derived from any restricted or prohibited firearm.# Due to the action type and novel design, this receiver set meets the legal standard of a non-restricted firearm as per the Canadian Firearms Act and related Regulations.# The minimum overall length when assembled into a working firearm must be over 26" to meet the standard of non-restricted.
Features:
Spring-assisted, manually-operated, straight-pull bolt action
Side-charging handle can be mounted to Left or Right side (ejects to the Right always
Can be readily assembled to shoot 223 Rem, 5.56x45, .300 BLK, 6.5 Grendel, .224 Valkyrie, 7.62x39, and many other cartridges
Integrated QD port at the rear
Extra-flared magwell
Designed and manufactured entirely in Canada
Specifications:
Receiver and Bottom Metal Material:# High quality, domestically sourced 6061-T6 alloy
Receiver and Bottom Metal Finish:# Hard Black Anodizing
Bolt Carrier Material:# HTSR 4140 steel
Bolt Carrier Finish:# QPQ Black Nitride
Caliber:# Multi
Included Components:
(1) MRA Renegade Receiver
(1) MRA Renegade Bottom Metal
(1) MRA Renegade Bolt Carrier (requires bolt, firing pin, camp in, and retaining pin)
(1) MRA Renegade Cylinder Charging Handle
(1) MRA Renegade End Plate
(1) MRA Renegade Barrel Gas Journal Seal .750" diameter (allows the use of various aftermarket barrels with a gas port)
Required Components:
Barrel, bolt, hanguard, buttstock, lower parts kit, bolt, muzzle device
Compatible with:
Most AR-15 barrels, buttstocks, handguards, pistol grips, magazines, etc.
Not compatible with:
#AR-15 bolt carriers, AR-15 upper receivers, AR-15 lower receivers, AR-15 charging handles
Made in Canada
Name: MRA V1-B Receiver Right SIde.jpg
Views: 12578
Size: 16.4 KB
Name: MRA V1-B Receiver Left SIde.jpg
Views: 12542
Size: 14.2 KB
Name: MRA V1-B Lower Receiver.jpg
Views: 12526
Size: 13.3 KB
Looks good! I went with FDE and .30 cal as well, just 7.62x35 instead of x39!
Hopefully I’m in that other 25% that I’m guessing will arrive at TNA this week? I can’t wait, It’d be nice if my armaspec buffer and aero tension screw show up at the same time so I can put it all together 100% at once instead of piece meal; oh and I guess I also hope that my set comes matching or close enough to not bother me....
My wife loves hers: https://hips.hearstapps.com/hmg-prod...&resize=1200:*
LOL
Who sells the aero tension screw? none of the Canadian sites Have them. They should have included one with the set, they skipped mine during quality control check... lots of tolerance issues. In the end it’s together and works, if they know they’re set wobbles, then supply the part to fix the problem.
Dose she Let you drive it lol. What was Jeep thinking
Last edited by LMG Stoner; 10-04-2020 at 08:56 AM.
The remainder are expected to arrive tomorrow, then I’d expect they’ll be repacked for customers and go out on Tuesday.
True North Arms Corp.
Website truenortharms.com
Email info@truenortharms.com
Instagram truenortharms