Page 1 of 4 1234 LastLast
Results 1 to 10 of 34

Thread: Zero press from area 419

  1. #1
    Business Member Go_Big_Tactical's Avatar
    Join Date
    Aug 2017
    Location
    British Columbia
    Posts
    1,342

    Zero press from area 419

    Can be found here on our website for $1599 .



    DESCRIPTION


    As the quality and precision of reloading equipment has advanced in the last few years (AMP Annealers, AutoTricklers, Giraud Trimmers, IDOD Neck Turners, Primal Rights Priming Tools) we have watched companies overlook the core of the bench – the press. In late 2019 we began R&D on perfecting the precision reloading press – and we are happy to introduce the ZERO. It is the embodiment of our pursuit of ZERO tolerance reloading, with ZERO friction. The turret press also works toward ZERO variance in die setup. It will have ZERO equal on the market.

    Milled from all-American billet aluminum and stainless steel, this press moves with the help of 14 bearings, including a self-lubricating linear sleeve bearing, guiding the precision-ground 1.25″ ram with less than .0006″ of diametric clearance. Each press is hand measured and fitted, mating the ram and the bearing, ensuring the most precise ram stroke on the market – ZERO doubt about that. The linkage system will also glide on bearings and custom hardware which will allow us to assemble the system with near-ZERO slop. The operation of the oversized ram, with the .75″ steel arm and ZERO-friction knob will be unlike anything you’ve ever experienced.
    The turret system will be secured using a, over-sized, custom-made ZERO-point pull-stud, and the turret will be located using an oversized ball-detent system. Changing the position of the turret from one die to another will require only a turn of a (supplied) t-handle. When indexing the turret, repeatability variance of the system will be less than .0005″.
    The opening in the press will allow for sizing and seating of cases up to 338LM, and will accept standard 7/8″ dies and standard shellholders (we prefer the Redding). Using factory shellholders there will be a small amount of float available to account for uncontrollable 3rd party tolerances. We will also be making and selling shellholders specifically fit to the system later in 2020.
    We have designed a decapping/primer-catch system into the body of the press, eliminating goofy surgical hoses and baby food-like jars. A simple slide-out tray (with detent) will make this mundane process smooth, simple, and unobtrusive.
    We will ship all presses with a standard bolt-down plate, but will also have available Inline Fabrication plates for the system that will mount seamlessly.
    Want to watch our Facebook Live product reveal? Check it out >> HERE <<
    Read this and still ready to ask what it does that your vintage single stage doesn’t? Bullet point time, strap in.

    • The zero-slop turret head allows you to change between dies, eliminating the variability induced when removing and resetting dies
    • The turret head allows the press to work with multiple die-attachments (7/8 thread currently, 1-1/4 thread, and future unreleased stuff) without goofy thread-stacking adapters
    • The available ram-stroke here is 4.4″, allowing you to use it on significantly large cases
    • The extended ram position will be more repeatable than any ram-style press on the market
    • More efficient energy transfer from handle to ram via bearing-guided motion throughout the system
    • Adjustable/interchangeable handle setup for maximizing leverage/feel based on operation
    • Internally contained primer-catch system, eliminating baby food jars and surgical hoses hanging from your press
    • Made in America, from American materials

    Consistency is paramount in precision reloading, and that’s what we are really chasing here. From one stroke to the next, or one reloading session to another, we want every piece of ammo you make to be as consistent as possible. It’s the whole goal. The ZERO was designed around that goal, and provides you with an unmatched ability to create consistency.
    Last edited by Go_Big_Tactical; 11-24-2021 at 03:14 PM.

  2. #2
    Business Member Go_Big_Tactical's Avatar
    Join Date
    Aug 2017
    Location
    British Columbia
    Posts
    1,342
    Thanks for all the orders, these will ship out mid next week!

  3. #3
    Business Member Go_Big_Tactical's Avatar
    Join Date
    Aug 2017
    Location
    British Columbia
    Posts
    1,342
    This are on the way and arriving later next week!

  4. #4
    Business Member Go_Big_Tactical's Avatar
    Join Date
    Aug 2017
    Location
    British Columbia
    Posts
    1,342
    These are in stock and ready to ship!

  5. #5
    CGN Regular CZ_Silhouetter's Avatar
    Join Date
    Mar 2010
    Location
    Saskatchewan
    Posts
    104
    Quote Originally Posted by Go_Big_Tactical View Post
    These are in stock and ready to ship!
    Any Inline Fabrication mounting plates for the Zero in stock?

  6. #6
    Member Zane777's Avatar
    Join Date
    Oct 2019
    Location
    Richmond
    Posts
    51
    Can’t wait to try it!

  7. #7
    Super GunNutz GreenBob's Avatar
    Join Date
    Oct 2010
    Location
    CGN
    Posts
    5,875
    Quote Originally Posted by CZ_Silhouetter View Post
    Any Inline Fabrication mounting plates for the Zero in stock?
    I think it comes with the plate.
    BE PREPARED - Noah didn't build the Ark when it was raining!
    _________________________


  8. #8
    CGN Regular
    Join Date
    Apr 2014
    Location
    Edmonton AB
    Posts
    261
    This would have been a no brainer if Covid layoff #2 didn't just hit.

    The price per position breakdown is pretty sweet once you start thinking about having multiple rock chuckers setup.

  9. #9
    Business Member Go_Big_Tactical's Avatar
    Join Date
    Aug 2017
    Location
    British Columbia
    Posts
    1,342
    Quote Originally Posted by CZ_Silhouetter View Post
    Any Inline Fabrication mounting plates for the Zero in stock?
    We have some stands and quick change plates. They will be added shortly

  10. #10
    CGN Regular
    Join Date
    Feb 2010
    Location
    Sarnia, Ontario
    Posts
    351
    Looking forward to this, it’s going to be epic!!!
    When all is said and done, A lot more gets said than done!!!

Page 1 of 4 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •