Last minute edition to the website, very little info online!! As always:
You can E-mail us at: sales@wolverinesupplies.com
You can Call us at: 204-748-2454
You can send at letter to: Box 729 , #1 River Valley Road, Virden, MB, R0M 2C0 , Canada
You can send a messenger to : Lattitude#49.89617 | Longitude -100.85384 NE ¼ 5-11-25
Link to the Website --> https://www.wolverinesupplies.com/SearchByKeyword?word=mcr#?sortValue=0¤tPage=2&MANUFACTURER=XTREME%20GUN%20SHOOTING%20CENTER
Specifications
Manufacturer: Xtreme Gun Receivers, Spectre parts
Model: WX-MCR
Calibre: 5.56 Nato
Action: Semi-Auto
Safety Type: Ambidextrous
Trigger Type: AR-15
Barrel Specifications: 18.7" SAE 4150 HT Alloy
Twist Rate: 1:8
Gas System: 1 Piece Gas Piston, Carbine Length Piston Driven
Muzzle Device: A2 Flash Hider, 1/2 x 28 Thread
Upper Receiver: 6061-T6 Aluminum, QPQ Nitrided Steel Wear Plates, Integral 913 Type Sight Rail, Left Side Charge only
Lower Receiver: 6061-T6 Aluminum
Furniture: M4 A2 Pistol Grip, Extendable Stock
Handguard: Free Float MLOK-Style with 1913 Type Accessory Rail
Sights: None
Finish: Type III Hard Black Anodized
Capacity: 5 Rounds
Weight: 7.4 lbs
Overall Length: 36.36"
Classification: Non-Restricted
Accessories Included: 2x 5 Round Magazines
Warranty:
Wolverine Supplies warranty the WX-MCR rifle to be free from defects in material and workmanship for a period of one year from the initial retail purchase. The purchaser must be able to provide proof of purchase if requested.
Additional Information:
Again, looking at the original AR180B rifle, we followed their lead and in the new WX-MCR we once again have both the cam pin and the charging handle travelling on steel. To achieve this, we added two steel plates: one inserted on each side of the upper receiver which is CNC machined from aluminum. This added to the cost, but we consider the advantages well worth the extra expense. We also carried out some improvements to the bolt carrier. This resulted in a much smoother action and has minimized the wear associated with a hard steel component running on soft aluminum.
As the WX-MCR is available in your choice of three calibers we had to revise the gas system, again this is different to anything that has been marketed to date. We have spent several months fine tuning the gas system and this has resulted a soft positive ejection. Another new feature not found on any previous production rifle of this general type is that we have added a case deflector. After several thousand rounds, we have avoided the ugly scarring that ejected cases can inflict on the receiver.
The hand guard which is free floating features a 1913 type accessary rail on the top. We have chosen a long 15 inch handguard. The handguard will be required to be slipped off in order to clean the gas system. The gas cylinder plug requires a standard ¼ inch wrench or socket for removal. Any further disassembly or modification may void the warranty.