Last Day of Sale: $699.99 MRA Renegade Builder Kit Regular Price:$ 799.95

[Bullseyenorth]

Attachment 445793

MRA Renegade Builder Kit
ID: V1-B UPC: 18219687 CLASSIFICATION: NON-RESTRICTED

Available here

Sale Price:$ 699.99
Regular Price:$ 799.95

The MRA Renegade is a novel, spring assisted, straight pull, magazine fed firearm design. It is composed of a proprietary receiver, bottom metal, and proprietary bolt carrier with integrated, swap-able left or right hand charging handle. This builder kit is compatible with a wide variety of commonly available firearm parts and accessories. In this way, the user can build a rifle to meet their specific utility and budget.The Renegade is designed and intended to not be capable of discharging ammunition in a semi-automatic fashion. The design is novel and is not derived from any restricted or prohibited firearm. Due to the action type and novel design, this firearm meets the legal standard of a non-restricted firearm as per the Canadian Firearms Act and related Regulations. The minimum overall length when assembled into a working firearm must be over 26″ to meet the standard of non-restricted.
Spring-assisted, manually-operated, straight-pull bolt action
Side-charging handle can be mounted to Left or Right side (ejects to the Right always)
Can be readily assembled to shoot 223 Rem, 5.56×45, .300 BLK, 6.5 Grendel, .224 Valkyrie, 7.62×39, and many other cartridges
Integrated QD port at the rear
Extra-flared magwell
Designed and manufactured entirely in Canada
Receiver and Bottom Metal Material: High quality, domestically sourced 6061-T6 alloy
Receiver and Bottom Metal Finish: Hard Black Anodizing
Bolt Carrier Material: HTSR 4140 steel
Bolt Carrier Finish: QPQ Black Nitride
Caliber: MultiIncluded Receiver Kit Components:
(1) MRA Renegade Receiver
(1) MRA Renegade Bottom Metal
(1) MRA Renegade Bolt Carrier (requires bolt, firing pin, cam pin, and retaining pin)
(1) MRA Renegade Cylinder Charging Handle
(1) MRA Renegade End Plate
(1) MRA Renegade Barrel Gas Journal Seal .750″ diameter (allows the use of various aftermarket barrels with a gas port)
Required Components (NOT INCLUDED): Barrel, bolt, handguard, buttstock, lower parts kit, muzzle device

Compatible with: Most AR-15 barrels, buttstocks, handguards, pistol grips, magazines, etc.

Not compatible with: AR-15 bolt carriers, AR-15 upper receivers, AR-15 lower receivers, AR-15 charging handles

Attachment 449879

[Nbhunt3r]

Do these use an AR bolt?

[chrisco]

Do these use an AR bolt?

Comes with a new proprietary bolt carrier but uses an AR Bolt with gas rings removed.

I love my MRA build and Bullseye is Top Notch to buy from

Shoot straight - chrisco

[hifiwasabi]

Well crap. I guess I HAVE to buy a Renegade now. I was robbed of the privilege of building an AR, so this seems like a worthy substitute

[Trapanese]

Well crap. I guess I HAVE to buy a Renegade now. I was robbed of the privilege of building an AR, so this seems like a worthy substitute

It will never be the same but this set is well built and nice looking. Def one of the best boxing day deals around too.

[drift1122]

These are fun to shoot

[thegrandpoohbah]

Do these use an AR bolt?

You'll need the bolt, cam pin, firing pin and firing pin retaining pin from a standard AR-15 BCG.

[Bullseyenorth]

You'll need the bolt, cam pin, firing pin and firing pin retaining pin from a standard AR-15 BCG.

Thanks for the Tech support.
Their is also a builders group on Facebook to help each other out.

https://www.facebook.com/groups/1279...925/?ref=share

[hifiwasabi]

Snagged one. Now, research time!

[Bullseyenorth]

Sale ends tonight