CanadianGunNutz.com logo, Firearms News and Classifieds in Canada

Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: Dlask made 10/22 bolt and charging handle

  1. #1
    CGN Regular
    Join Date
    Mar 2017
    Posts
    199

    Dlask made 10/22 bolt and charging handle

    Hey Leigh just curious if you guys are still selling the dlask branded complete bolts, guide rod and charging handle. I can't find them listed on your webpage but see they come in the pre built Tuff-22

  2. #2
    Member irish_gun_lover's Avatar
    Join Date
    Jun 2015
    Location
    Quebec city
    Posts
    68
    Very curious about that as well?! And if not, any eta on charging handles alone ?
    ΜΟΛΩΝ ΛΑΒΕ

  3. #3
    CGN Ultra frequent flyer ShawnC6's Avatar
    Join Date
    Dec 2014
    Location
    Airdrie, AB
    Posts
    4,589
    Quote Originally Posted by irish_gun_lover View Post
    Very curious about that as well?! And if not, any eta on charging handles alone ?
    I’d like charging handles too

  4. #4
    Member
    Join Date
    Jan 2013
    Location
    BC
    Posts
    32
    x3 on charging handles.

  5. #5
    CGN Ultra frequent flyer ben777lemay's Avatar
    Join Date
    Dec 2010
    Location
    Canada
    Posts
    2,444
    Yeah I also would like a charging handle.

    I prefer the classic models with maple leafs like they use to produced in the past over the newer *pinaple* style.
    _/﹋\_
    (҂`_´)
    <,︻╦╤─ ҉ - -
    _/﹋\_

  6. #6
    Super GunNutz Z06corvette's Avatar
    Join Date
    Jan 2007
    Location
    Cowtown
    Posts
    1,230
    I want a maple leaf charging handle as well.
    As long as the sheep have grass to eat they will remain oblivious to the wolf that lies in wait.

  7. #7
    Business Member Dlask Arms's Avatar
    Join Date
    May 2007
    Location
    Delta, BC
    Posts
    1,993
    We were having a problem with getting the guide rods from Kidd. We have found a different supplier and I actually think these may be better because we have them made to our dimensions with a slightly smaller 'mushroom' on the end so it doesn't interfere with the bolt as it travels rearward, as well we had them cut a groove for the E-clip to capture the spring on the rod as a single unit (like the factory Ruger unit) for ease of installation and removal.

    For the charging handle itself we only make the barrel type for now but can do a run of the paddle style in the future I suppose. We discontinued them because it is difficult to engrave them on the curved portion and would end up scrapping batches because of it. I do have about 50 of the skeletonized paddles we made. Same shape and profile as the maple leaf ones but with a cut out in the middle :

    Name:  paddle.jpg
Views: 1502
Size:  35.7 KB

    I will load these onto the website this afternoon in kits with the new guide rods.
    Cheers,
    Leigh
    Dlask Arms Corp.
    www.dlaskarms.com

    “Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

  8. #8
    Member irish_gun_lover's Avatar
    Join Date
    Jun 2015
    Location
    Quebec city
    Posts
    68
    Ill take 3 please!
    ΜΟΛΩΝ ΛΑΒΕ

  9. #9
    Super GunNutz Z06corvette's Avatar
    Join Date
    Jan 2007
    Location
    Cowtown
    Posts
    1,230
    Great news, I'll see what else I need to spread out the shipping costs. I have a Ruger takedown Backpacker inbound.
    As long as the sheep have grass to eat they will remain oblivious to the wolf that lies in wait.

  10. #10
    GunNutz
    Join Date
    Jun 2020
    Posts
    22
    Quote Originally Posted by Dlask Arms View Post
    We were having a problem with getting the guide rods from Kidd. We have found a different supplier and I actually think these may be better because we have them made to our dimensions with a slightly smaller 'mushroom' on the end so it doesn't interfere with the bolt as it travels rearward, as well we had them cut a groove for the E-clip to capture the spring on the rod as a single unit (like the factory Ruger unit) for ease of installation and removal.

    For the charging handle itself we only make the barrel type for now but can do a run of the paddle style in the future I suppose. We discontinued them because it is difficult to engrave them on the curved portion and would end up scrapping batches because of it. I do have about 50 of the skeletonized paddles we made. Same shape and profile as the maple leaf ones but with a cut out in the middle :

    Name:  paddle.jpg
Views: 1502
Size:  35.7 KB

    I will load these onto the website this afternoon in kits with the new guide rods.
    I need one of the skeletonized charging handles too please! I looked at the website but nothing listed........

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •