WX-MCR complete rifles in stock May 25th 2021

[Wolverine .303]

Click the pic for more deets....

Hope everyone had a lovely weekend

[Mahakala]

have the concerns regarding the rougher finishing on the WX been addressed?

[Sawakita]

Does WX MCR line has 762 x 39?

[CanadianGunMan]

In for one, been waiting a while for this to pop up!

[Ustauk]

Does WX MCR line has 762 x 39?

Also, would Xtreme or Spectre be up for trying some alternate round types by commission? Would the 7.62x39 mm work for 6 mm ARC or Grendel, for example? Would they make a 300 Blackout using a .223 bolt?

[Wolverine .303]

have the concerns regarding the rougher finishing on the WX been addressed?

If your having a concern or problem with a WX or a WS have you contacted our warranty/service department for assistance?

Does WX MCR line has 762 x 39?

Only the WS has the 7.62x39 option right now.

[Ustauk]

have the concerns regarding the rougher finishing on the WX been addressed?

If your having a concern or problem with a WX or a WS have you contacted our warranty/service department for assistance?

Example from an earlier thread of concern from member hunterhenderson-> https://www.canadiangunnutz.com/foru...in-stock/page6

You are probably not going to want to use the xtreme receiver for this fantasy build, I ended up sending mine back, its a much rougher design than the WS-MCR with sharp edges, very little mag well beveling, thin anodizing and extremely tight pins, so tight it was impossible to change over my 762 upper in the field without a descent hammer and punch, i like my WS-MCR way better from functionality to appearance

I think the question is, have issues like the ones noted above been addressed in current WX production, so that rifles will not have to be sent back for warranty or returned for the above reasons?

[Mahakala]

Example from an earlier thread of concern from member hunterhenderson-> https://www.canadiangunnutz.com/foru...in-stock/page6



I think the question is, have issues like the ones noted above been addressed in current WX production, so that rifles will not have to be sent back for warranty or returned for the above reasons?

Thank you for clarifying

If your having a concern or problem with a WX or a WS have you contacted our warranty/service department for assistance?



Only the WS has the 7.62x39 option right now.

Not possible if I don't own one yet. Was considering the WX variant until I read about how poorly finished they were.