Large Keltec Shipment Has Arrived!

[Bullseyenorth]

Attachment 499881

Available here

All Keltec Firearms
Available Here

Accepts Glock 17 magazines.The SUB-2000 is a semi-automatic rifle chambered for the 9mm Luger. By folding the barrel upwards and back, the SUB-2000 rifle can instantly be reduced to a size of 16.25 x 7 inches for ease of storage.

The polymer of the firearm is made of an impact modified glass reinforced Zytel. Two integrated Picatinny rails come standard on the SUB-2000 forend for mounting compatible accessories. The forend also includes five mounting slots per side, configured for various M-LOK accessories.

The stock can be adjusted to three different positions for shooter's comfort. Each position adds approximately 5/8 of an inch to the overall length of the rifle, with a total extension of 1.25 inches in the further rearward position. The stock includes a single point sling loop attachment, a slot for adding a nylon sling loop (1.25" wide is ideal), and a Picatinny rail on the bottom for adding small accessories.

The SUB-2000 features a push-bolt safety located behind the trigger on the grip assembly. The bolt can be locked in the rear position by the operating handle. The rear sight is of aperture type and the AR style front sight can be adjusted for windage and elevation.

The thread protector on the SUB-2000 is removable, if the shooter desires to replace the thread protector with a compatible accessory for the 1/2"-28 threads (9mm model). The SUB-2000 can easily be disassembled for cleaning or inspection without tools.

SUB-2000 Gen2 New Features:

- Front sight accepts AR-15 front sight posts, is adjustable for windage and elevation, and removes to expose 1/2x28 barrel threads
- New handguard with top and bottom rails plus Magpul M-LOK slots on the sides
- 40% larger ejection port
- More ergonomic grip
- 3-position adjustable buttstock
- More sling attachment options
- When folded, it's locked on the picatinny rail rather than the front sight post
- Better safety detent

Operating System: Blowback
Caliber: 9mm Luger
Barrel Length: 18.5", Threaded
Barrel Twist Rate: 1:10
Trigger Pull: 9 - 10lbs
Accessory Mount : Picatinny Rail, M-Lok
Length: (Stock collapsed / extended) 29.25in / 30.5in
Length of Pull (Stock to trigger): 14.5in / 13.25in
Max Width: 1.25in
Majority Width: 1.75in
Max Height: 7 in
Weight (Unloaded, no mag): 4.25lbs
Barrel Threads (9mm): 1/2x28

Attachment 500333

Available here

[Bullseyenorth]

Attachment 499912

Available here

[Bullseyenorth]

Attachment 500126

Available here

You can enjoy all of the head-turning flash and hoorah of a magnum revolver, but with modest recoil similar to that of a 9mm pistol. Its light weight, modest recoil and top-notch accuracy make it a pleasure to work with. This pistol’s 5.56/.223 chambering, and AR-style magazine compatibility, make it an ideal handgun for AR enthusiasts. For plinking, handgun hunting, bench-rest target shooting , the PLR-16 can do it all.Model: Kel-Tec PLR16R
Calibers: .223 Rem
Action: Gas Operated Semi-Automatic
Finish: Blued
Grips: Black Polymer
Weight unloaded: 3.4lbs / 1.55kg
Length: 18.5″ / 467mm
Barrel length: 9.2″ / 234mm
Twist: 1:9″ / 1.229mm
Capacity: AR15 compatible magazine
Trigger pull: 5.5-7.5lbs / 24.4-33.4N
Sight radius: 12.5″ / 318mm
Muzzle velocity: 2600fps

[Ravage]

Attachment 499912

Available here

I was looking for one of these but with multi mag because I want to use my P226 40sw magazines

[froggdogg]

Is the PLR-16 available? It says out of stock

[btabin]

Is the PLR-16 available? It says out of stock

I'm wondering they have any magazines for it, as they're 10 round capacity.

[TexasGuns]

Is the PLR-16 available? It says out of stock

I want one too

[Hellfrozeover]

I'm wondering they have any magazines for it, as they're 10 round capacity.

The factory mag that comes with the PLR is cheap plastic crap. It takes any AR mag, don’t waste money on the factory ones.

[btabin]

The factory mag that comes with the PLR is cheap plastic crap. It takes any AR mag, don’t waste money on the factory ones.

Never had any issues with them in my SU-16.

[Bullseyenorth]

Is the PLR-16 available? It says out of stock

Unfortunately…they sold quick.