Page 9 of 37 FirstFirst 12345678910111213141516171929 ... LastLast
Results 81 to 90 of 363

Thread: Lynx 180B Lower Receiver

  1. #81
    CGN Regular
    Join Date
    Jul 2019
    Location
    Montreal, Québec
    Posts
    120
    I wonder if it would be possible to do the Zhukov stock adapter without the hinge part.

    Almost like this integrated :

    https://www.evike.com/images/large/hbi-24234.jpg

    Instead of doing it like the Incarnation Arms one.

  2. #82
    Business Member SpectreBallistics's Avatar
    Join Date
    Sep 2016
    Location
    Sherwood Park, AB
    Posts
    1,494
    Quote Originally Posted by vcarriere View Post
    I wonder if it would be possible to do the Zhukov stock adapter without the hinge part.

    Almost like this integrated :

    https://www.evike.com/images/large/hbi-24234.jpg

    Instead of doing it like the Incarnation Arms one.
    The folding mechanism is built into the stock. The Zhukov stock mount is just a block of aluminum that the stock bolts to. It has nothing to do with folding.

  3. #83
    CGN frequent flyer Ravage's Avatar
    Join Date
    Aug 2014
    Location
    Grande Prairie Alberta
    Posts
    1,374
    You guys need to make some 1913 adapters that screw into the buffer tube hole

    https://www.thefirearmblog.com/blog/...ck-Adapter.jpg

    Like these but available in Canada

  4. #84
    CGN Regular
    Join Date
    Jul 2019
    Location
    Montreal, Québec
    Posts
    120
    Quote Originally Posted by SpectreBallistics View Post
    The folding mechanism is built into the stock. The Zhukov stock mount is just a block of aluminum that the stock bolts to. It has nothing to do with folding.
    Yes I know, I just meant do an adapter that replaces the plastic part that would go into the receiver normally. Basically removing the stock from the pivot point and doing an adapter like the one I showed were it's only the stock without the hinge that is placed on the adapter.

    Like this one https://cdn11.bigcommerce.com/s-2fcw...1621524152.jpg

    Sorry, It's difficult to explain.

  5. #85
    CGN Ultra frequent flyer
    Join Date
    Oct 2018
    Posts
    2,035
    Quote Originally Posted by vcarriere View Post
    Yes I know, I just meant do an adapter that replaces the plastic part that would go into the receiver normally. Basically removing the stock from the pivot point and doing an adapter like the one I showed were it's only the stock without the hinge that is placed on the adapter.

    Like this one https://cdn11.bigcommerce.com/s-2fcw...1621524152.jpg

    Sorry, It's difficult to explain.
    No criticism, just curious, if you wanted a variable length of pull stock with no folding mechanism, why wouldn't you just use a standard buffer tube stock? And if you like the look of the Zhukov, the folding mechanism does not add much length at all; why can't you just keep it open all the time, never folded if you don't need the function?

    The Zhukov is use on many firearms, and I've heard no reports of the folding mechanism causing shimmying or issues with stiffness when locked open, so having it be a folder seems to have not compromised its function compared to non-folding stocks.

  6. #86
    Business Member SpectreBallistics's Avatar
    Join Date
    Sep 2016
    Location
    Sherwood Park, AB
    Posts
    1,494
    Quote Originally Posted by vcarriere View Post
    Yes I know, I just meant do an adapter that replaces the plastic part that would go into the receiver normally. Basically removing the stock from the pivot point and doing an adapter like the one I showed were it's only the stock without the hinge that is placed on the adapter.

    Like this one https://cdn11.bigcommerce.com/s-2fcw...1621524152.jpg

    Sorry, It's difficult to explain.
    To maintain proper length of pull, we're going to leave the zhukov stock as-is.

  7. #87
    Business Member SpectreBallistics's Avatar
    Join Date
    Sep 2016
    Location
    Sherwood Park, AB
    Posts
    1,494
    Quote Originally Posted by Ravage View Post
    You guys need to make some 1913 adapters that screw into the buffer tube hole

    https://www.thefirearmblog.com/blog/...ck-Adapter.jpg

    Like these but available in Canada
    While these aren't needed for this project, doing something like this has been our plan for awhile. It would be good on our 10/22 chassis and Light Practical Carbine.

  8. #88
    CGN Regular
    Join Date
    Oct 2013
    Location
    BC
    Posts
    317
    Ok in on batch 2. I should have had a batch 1. Had it in my cart on my phone at work, got distracted, then website down, then work got in the way again and sold out.
    If you need the rest of the payment in September, give me some time to answer. I'll be in the woods chasing elk for a good chunk of it without cell service

  9. #89
    CGN frequent flyer Ravage's Avatar
    Join Date
    Aug 2014
    Location
    Grande Prairie Alberta
    Posts
    1,374
    Quote Originally Posted by SpectreBallistics View Post
    While these aren't needed for this project, doing something like this has been our plan for awhile. It would be good on our 10/22 chassis and Light Practical Carbine.
    Exactly the use I want it for I have a Sig MCX stock that I want to put on your chassis but need an adapter

  10. #90
    Business Member SpectreBallistics's Avatar
    Join Date
    Sep 2016
    Location
    Sherwood Park, AB
    Posts
    1,494
    Quote Originally Posted by KBCL View Post
    Ok in on batch 2. I should have had a batch 1. Had it in my cart on my phone at work, got distracted, then website down, then work got in the way again and sold out.
    If you need the rest of the payment in September, give me some time to answer. I'll be in the woods chasing elk for a good chunk of it without cell service
    Don't worry we will give people enough time. We're going to collect payment once we drop them off at anodizing so you'll have a couple of days. If you're going to be gone when we estimate we will ship just email us and we can work something out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •