Lynx 180B Lower Receiver

vcarriere said:
I wonder if it would be possible to do the Zhukov stock adapter without the hinge part.

Almost like this integrated :

https://www.evike.com/images/large/hbi-24234.jpg

Instead of doing it like the Incarnation Arms one.
Click to expand...

The folding mechanism is built into the stock. The Zhukov stock mount is just a block of aluminum that the stock bolts to. It has nothing to do with folding.
 
SpectreBallistics said:
The folding mechanism is built into the stock. The Zhukov stock mount is just a block of aluminum that the stock bolts to. It has nothing to do with folding.
Click to expand...

Yes I know, I just meant do an adapter that replaces the plastic part that would go into the receiver normally. Basically removing the stock from the pivot point and doing an adapter like the one I showed were it's only the stock without the hinge that is placed on the adapter.

Like this one https://cdn11.bigcommerce.com/s-2fc...cts/202/1131/Zhuk191301__36333.1621524152.jpg

Sorry, It's difficult to explain.
 
vcarriere said:
Yes I know, I just meant do an adapter that replaces the plastic part that would go into the receiver normally. Basically removing the stock from the pivot point and doing an adapter like the one I showed were it's only the stock without the hinge that is placed on the adapter.

Like this one https://cdn11.bigcommerce.com/s-2fc...cts/202/1131/Zhuk191301__36333.1621524152.jpg

Sorry, It's difficult to explain.
Click to expand...

No criticism, just curious, if you wanted a variable length of pull stock with no folding mechanism, why wouldn't you just use a standard buffer tube stock? And if you like the look of the Zhukov, the folding mechanism does not add much length at all; why can't you just keep it open all the time, never folded if you don't need the function?

The Zhukov is use on many firearms, and I've heard no reports of the folding mechanism causing shimmying or issues with stiffness when locked open, so having it be a folder seems to have not compromised its function compared to non-folding stocks.
 
vcarriere said:
Yes I know, I just meant do an adapter that replaces the plastic part that would go into the receiver normally. Basically removing the stock from the pivot point and doing an adapter like the one I showed were it's only the stock without the hinge that is placed on the adapter.

Like this one https://cdn11.bigcommerce.com/s-2fc...cts/202/1131/Zhuk191301__36333.1621524152.jpg

Sorry, It's difficult to explain.
Click to expand...

To maintain proper length of pull, we're going to leave the zhukov stock as-is.
 
Ok in on batch 2. I should have had a batch 1. Had it in my cart on my phone at work, got distracted, then website down, then work got in the way again and sold out.
If you need the rest of the payment in September, give me some time to answer. I'll be in the woods chasing elk for a good chunk of it without cell service ;)
 
KBCL said:
Ok in on batch 2. I should have had a batch 1. Had it in my cart on my phone at work, got distracted, then website down, then work got in the way again and sold out.
If you need the rest of the payment in September, give me some time to answer. I'll be in the woods chasing elk for a good chunk of it without cell service ;)
Click to expand...

Don't worry we will give people enough time. We're going to collect payment once we drop them off at anodizing so you'll have a couple of days. If you're going to be gone when we estimate we will ship just email us and we can work something out.
 
Lynx 180B Update:

We prototyped and tested our Zhukov Yugo AK stock mount and it works great. Our Lynx 180B is the only 180 receiver on the market that can natively accept a Yugo AK stock without the use of a clunky adapter. We're going to put more details in a separate thread since this might get buried.

20210725191704-3a207173-me.jpg


20210725191358-03a99266-me.jpg
 
You must log in or register to reply here.
Back
Top Bottom