Night Vision Chat Thread - Ask Us Anything

[kelaa]

I understand that by the very nature of the devices, the google mounted devices have to shine light into the user's eyes. Looking at some digital night vision video recordings, it seems the glow is fairly prominent when viewed from the side of the user. (these are videos taken a few meters from the NOD users). Is there any signature when seen at some distance? Do people wearing NODs have a glow visible to other NOD users?

[Cold Harbour Supply]

I was wondering what the difference was in the Katana Pro VS the Standard model. Thanks for any help

Only the lenses are different. All of our "Standard" device offerings have lenses made by Optronics Engineering in Israel. The Pro models feature US Milspec optics made by either Carson Industries or Edmund Optics. The Pro models will have increased contrast, off-axis flare reduction, and perfect rectilinear performance.
Check out some comparison photos and additional information via this link:
https://www.instagram.com/p/CTxdfLFpRlM/

Can you get AN PVS4 parts and accessories?
I have Dark Invader models , made in Seattle, Washington Area

Unfortunately, no.

I understand that by the very nature of the devices, the google mounted devices have to shine light into the user's eyes. Looking at some digital night vision video recordings, it seems the glow is fairly prominent when viewed from the side of the user. (these are videos taken a few meters from the NOD users). Is there any signature when seen at some distance? Do people wearing NODs have a glow visible to other NOD users?

What you're seeing via high-sensitivity IR cameras is exaggerated. That being said, when viewing with un-aided vision or even under analog night vision, there will be a faint glow but past 20m, it is not noticeable. I should probably note that the splash is only visible at specific angles (45 degrees from the direction of the device user). If the user is directly facing you, most of that splash will be covered by the device itself.
If back-splash is of concern, all of our devices ship with rubber eyecups that clip onto the back of the device eyepieces and contain any illumination backsplash against the user's face.

[richmyster]

A little early ... but can we expect any Christmas deals? I have my eyes on a PVS 14 Pro.

[Cold Harbour Supply]

Can neither confirm nor deny.

[jg007]

Can neither confirm nor deny.

Post it quick! My Xmas money is being spent fast!!

[jg007]

A little early ... but can we expect any Christmas deals? I have my eyes on a PVS 14 Pro.

Interested in the pro as well! What you say Stephen????

[gwhysow]

Sorry if I missed this - what is the general water/weather resistance for CH assembled units like the PVS14?

Hope you guys are doing well!

[Steers]

How about you guys put together like a best under 3k package for us

[Cold Harbour Supply]

Sorry if I missed this - what is the general water/weather resistance for CH assembled units like the PVS14?

Hope you guys are doing well!

Thanks dude!
Our Pro monoculars and binoculars are all IP67 and submersion rated.

How about you guys put together like a best under 3k package for us

Cheap night vision isn't good and good night vision isn't cheap.
As users of night vision who have been through the very bottom of the barrel all the way to where we are now, trust us when we say that you will save yourself the inevitable disappointment if you just spent a little more. Our systems are the perfect sweet spot of performance and leave nothing on the table.
Take a look at our PVS-14 Standard monocular, they have the same high performance intensifier as our Pro monoculars, inside an industry-standard housing that accepts all common milspec parts, and can be upgraded down the road if desired.
https://coldharboursupply.com/produc...sion-monocular

[gwhysow]

Thanks for the notes above. I have a lot of respect for the level of knowledge and service you bring to the table - I just wish your portfolio was a little more palatable for repeat business You'd be a shoe in for favorite vendor.