MCR Build SUPPLY DROP!

[BubbaWolverine]

Going live right away!

7.62x39 MCR Build
by W303

Not sure when we will see more 39's, call and get you the last one! GONZO!
$2499 as pictured.





Specs:
Spectre Ltd. WS-MCR rifle in 7.62x39 18.7" barrel Black
Hi-Lux 1-8x26 FFP (CMR8F-R ) CW-4 Red Illuminated 34mm
Athlon Cantilever Scope Mount Precision 34mm Rings 20 MOA
Midwest Industries Keymod 5 Slot Panels, Black
Midwest Industries Keymod Three (3) Slot Panels
Daniel Defense Keymod Vertical Grip Black
MI G3 K Series One Piece Free Float KM Handguard 12"
FAB AR15 Shock Absorbing Butt Stk Tan
MagPul MIAD Grip FDE

More builds coming down the pipe. Stay tuned.

[Ustauk]

Did Wolverine always offer customized builds, but just didn't really advertise it as a service? Does the customer get the OEM parts for spare, or do they go back to Spectre for use on the next rifle to slightly offset the price of the custom ordered parts? Or are these built completely in house from receiver kits and 180 specific parts kits, with the remaining parts selected by the customer? Just curious, completely understand if you want to keep the info confidential.

And what specific custom parts are in the pictured rifle?

[Wolverine .303]

Did Wolverine always offer customized builds, but just didn't really advertise it as a service? Does the customer get the OEM parts for spare, or do they go back to Spectre for use on the next rifle to slightly offset the price of the custom ordered parts? Or are these built completely in house from receiver kits and 180 specific parts kits, with the remaining parts selected by the customer? Just curious, completely understand if you want to keep the info confidential.

And what specific custom parts are in the pictured rifle?

We don't breaks, lunch, or really ever turn off our brains when we enter this building. So to take a "Break" we go shopping in the store, make builds from things we either have laying around, or off the shelf. As for "extras" from the builds, **generally** things that were stock are included with the gun when it ships. But the reason for some of our builds is that we have odds and sods missing things.... Like this one for example, service needed a spare handguard to repair a rifle... so this one was robbed, sitting there naked, barrel exposed and shamed to the world. So I took it in, cleaned it up, gave it a new handguard so it could rest easy..

Hope that clears it up!

[Ustauk]

^
Thanks for the info!

[BubbaWolverine]

And what specific custom parts are in the pictured rifle?

Added specs

[45C]

The scary black gun pictured on the bottom has a beaver tail grip , opposed to the straight profile grip , in the top picture. Are these two different style 180s?

[BubbaWolverine]

The scary black gun pictured on the bottom has a beaver tail grip , opposed to the straight profile grip , in the top picture. Are these two different style 180s?

The one in my signature block has the Spec 180 MCR lower. The pictured 7.62x39 has the original MCR lower.

[Ustauk]

Thanks!

[Jacobean]

The one in my signature block has the Spec 180 MCR lower. The pictured 7.62x39 has the original MCR lower.

Also curious about barrel, iron post and handguard on sigblock build. Looks like a nice C7 homage.

[Uther419]

Also curious about barrel, iron post and handguard on sigblock build. Looks like a nice C7 homage.

unfortunately, Canada has never used that handguard or rear site.

perhaps your thinking of a us m16a3/a4?

The hand guard is a KAC model M5?



kind of an m4a1 m16a4 homage IMO