DAA Turbo Case Feeder Plate

[Fast Toys]

The DAA Turbo Case-Feeder Plate is a highly modified and evolved reloading accessory which will greatly increase the output speed of your current Dillon Case Feeder

The plate is designed to handle all pistol calibers – from .380 to 0.45, so one plate can now handle all your pistol calibers!

** For the very long revolver cases (38SPL and 357) the plate must be elevated using a large washer (not included).

The DAA Turbo Case-Feeder Plate is built very differently from the original dillon plate. Our plate is much thicker, and incorporate deep feeding grooves into each of the 32 output pockets on the plate. These grooves greatly improve the efficiency of picking up brass as the plate rotates, ensuring that more of the pockets output a case, on each rotation. This increases the output speed by 30-80% compared to the original plate. (output speed gain varies per caliber. Highest gains are with 9mm, lowest with .45)

The thicker plate design also serves to offer better support to the cases as they drop out the exit hole, reducing the likelihood of them rotating on the way out and possible causing a hang-up in the output funnel.

The DAA Turbo Case-Feeder Plate includes an aluminum slip clutch assembly at its center, to insure the disc can slip and not stall the motor if a jam occurs. Our slip-clutch assembly includes a handy stainless steel D-ring which makes it much easier to grab hold of the plate from its center and lift it up off the motor shaft, and out the case feeder. (experienced reloaders will know that this can be difficult to do without such a feature, especially with a well-used, dirty plate/casefeeder)

The 292mm diameter of the DAA Turbo Case-Feeder Plate make it a drop-in fit for both the original AC Dillon case feeder, as well as the newer Variable Speed DC model. It will also fit and can be used in the Hornady case feeder as well.

Each DAA Turbo Case-Feeder Plate ships including the innovative DAA Dislodge-Wedge for Dillon Variable speed Casefeeder (also sold separately). This wedge replaces the original Dillon wedge in the Variable speed case feeder, further improving performance. (customers not using the Dillon variable speed case feeder, wont use this wedge). This larger, contoured wedge fits down to the base of the plate and eliminates case pinching and jamming, experienced occasionally with the original, smaller Dillon wedge.


Order on our web site in Canada: https://fasttoys.net/ca/DAA-Turbo-Case-Feeder-Plate/

[adamg]

Personally I never wished the 2-speed Dillon case feeder could feed faster. But I have had it hang up the feed section reasonably often.

[Fast Toys]

I think the big improvement for this is that it is designed to prevent the jams that happen on the case feeder plate. I saw that all the time when using the Dillon Case feeder with a rollsizing machine.

[Ditchdoc]

Plastic? Metal?

[Fast Toys]

Plastic? Metal?

They are plastic.

[Fast Toys]

We are sold out of these but have some more on order.

[Howyadoin2]

Ordered the Dillon case feeder for my 550 6 months ago, it just got shipped out yesterday from Dillon. let me try this first then I'll see how it goes from there.
Thanks for more options to consider and learn from!

[Armourall]

I have three of the four standard plates (small pistol, large pistol and small rifle) and they work well. I will pick up just the DAA adapter piece that attaches to the side of the case feeder to see if that works better setting the cases up for falling down the tube (it can be purchased separately I see), but I don't need another plate.

[Fast Toys]

We have a few more of these arriving in the next few days.

[Fast Toys]

We have filled back orders and have two more in stock ready to go