CZ Bren 2 MS 762x39 Magwell Conversion X 10 mags in Canada 150.00USD

[IRUNGUNS]

Magwell conversion for your 7.62×39 CZ Bren 2 to accept standard AR pattern 7.62×39 magazines. The conversion utilizes the same insert found in the 556 Bren 2 MS models, along with a Delrin pin to facilitate take down and re-assembly of the magazine release system. The conversion is backwards compatible, meaning that you can revert back to the factory dedicated polymer 7.62×39 magazines at any time. With the conversion installed you will only be able to use AR pattern magazines. We have experienced outstanding reliability with 7.62×39 AR pattern magazines from D&H Industries and C-Products.

CZ Bren 2 7.62×39 AR Magwell Conversion
Drop-in Sleeve for AR 7.62×39 Pattern Magazines
Use Standard 922R Compliant Magazines


Please click picture for link to site

[Sawakita]

good timing!

[onetwentyish]

What we need is the Cz x39 mags.

Investing in pistol mags is futile with this looming legislation.

[Curtis.G.Stade]

are these already in canada or arriving next import ?

[jiffx2781]

What we need is the Cz x39 mags.

Investing in pistol mags is futile with this looming legislation.

It's not unfathomable to think that some people are plain and simply sick of being scapegoated and are past the point of giving a s#it.

[Curtis.G.Stade]

It's not unfathomable to think that some people are plain and simply sick of being scapegoated and are past the point of giving a s#it.

I don't give a S. ill continue using pistol mags in semi rifles.

[RRH.01]

What we need is the Cz x39 mags.

Investing in pistol mags is futile with this looming legislation.

This is the wrong attitude, Canadians need to stop acting like beaten down broken dogs afraid of their “owner”

[Brian46]

Magwell conversion for your 7.62×39 CZ Bren 2 to accept standard AR pattern 7.62×39 magazines. The conversion utilizes the same insert found in the 556 Bren 2 MS models, along with a Delrin pin to facilitate take down and re-assembly of the magazine release system. The conversion is backwards compatible, meaning that you can revert back to the factory dedicated polymer 7.62×39 magazines at any time. With the conversion installed you will only be able to use AR pattern magazines. We have experienced outstanding reliability with 7.62×39 AR pattern magazines from D&H Industries and C-Products.

CZ Bren 2 7.62×39 AR Magwell Conversion
Drop-in Sleeve for AR 7.62×39 Pattern Magazines
Use Standard 922R Compliant Magazines


Please click picture for link to site

Will the adaptor be available separately as well?

[bacardi]

Magwell conversion for your 7.62×39 CZ Bren 2 to accept standard AR pattern 7.62×39 magazines. The conversion utilizes the same insert found in the 556 Bren 2 MS models, along with a Delrin pin to facilitate take down and re-assembly of the magazine release system. The conversion is backwards compatible, meaning that you can revert back to the factory dedicated polymer 7.62×39 magazines at any time. With the conversion installed you will only be able to use AR pattern magazines. We have experienced outstanding reliability with 7.62×39 AR pattern magazines from D&H Industries and C-Products.

CZ Bren 2 7.62×39 AR Magwell Conversion
Drop-in Sleeve for AR 7.62×39 Pattern Magazines
Use Standard 922R Compliant Magazines


Please click picture for link to site

You got mag coupler as well? To connect two mags bottom to bottom.

Is it HBI magwell conversion?

[onetwentyish]

It's not unfathomable to think that some people are plain and simply sick of being scapegoated and are past the point of giving a s#it.

Exactly my point.