presale on the new WK 181 AK mags in 762x39

[Shooter1971]

I have 20 inch grendel 2 barrel and a lathe. What do these use for a barrel extension?

[True North Arms Corp]

I have 20 inch grendel 2 barrel and a lathe. What do these use for a barrel extension?

it's an ar15 barrel extension,
you can make a grendle 2 from this for sure but will need to increase the depth of your bolt face

[True North Arms Corp]

all preorder guns are shipped!

we have a few surplus left that are shipping same day

[sogone2day]

If we're ever in a position to use full-cap mags again, AK (or better yet, T81) mags are the way to go, as they are curved properly to feed well. The curve is necessary due to the taper on the 7.62x39 casing. XCR 7.62x39 pistol mags work ok, as they're only 10 rounds, but full-capacity STANAG mags don't feed as reliably as properly curved mags. This is why the Bren2 7.62x39, for example, has its own proprietary mags and slightly larger magwell to accomadate those mags.




...why reply if you don't actually know the answer?

Cause i have akmags and no stang xcrs. So it's relevant to me. And going back to fullcap idea is never gonna happen unless your criminal and ak mags are cheaper.
So thats my reply.

[HvacFridge Apprentice]

What’s the upper receiver bushing made out of? Same plastic as the other wk’s?
I’m interested in buying, but as the other fella mentioned, having some better parts pre-installed would be the way to go. And additional spare parts

[Tvw]

Confirmation on the T81 mags working and the magazine bolt hold works tho bolt drops when mag removed. Drum however does not due to the housing hitting the magwell.

[6ohmoney]

When are ya getting more of these?

[Loganator]

Link is dead on it? Cant find it

[Ustauk]

Confirmation on the T81 mags working and the magazine bolt hold works tho bolt drops when mag removed. Drum however does not due to the housing hitting the magwell.

Sweet! With the improved gas and piston system and it taking Type 81 mags, why would anyone get an M10x?

[Tvw]

Sweet! With the improved gas and piston system and it taking Type 81 mags, why would anyone get an M10x?

Agreed!

These rifles are excellent for the dollar and at this rate may be very rare one day. The two I have seen were under 50 in the serial #. As mentioned by TNA there is over 10k gen2 wk's in circulation.

Hope lots of these make it out. Canada has enough x39 that's for sure..