AT15 Gen 3 now available

[alberta tactical rifle]

We have been working on the latest generation of our AT15 lowers and now have them finished and ready to go.
I posted a thread here a while ago on engraving preferences. We opted to do mostly all black as the response from CGN members was that all black was preferred, but for some of us still wanted to have the engraving done after black ano was done, so engraved some after black ano was done, then had them clear anoed to keep the oil and crud from use from making the engraving mucky.





The changes on this 3rd generation AT15 lower is that ALL the sharp edges are gone, the trigger bow is radiused, the safety does not use a pointed pin type detent, a ball bearing is employed which makes the safety MUCH smoother to operate. The safety detent spring is captured as is the rear take down pin spring, so less flying parts to go astray.
We kept the rear take down pin tensioner that was incorporated into all of our previous lowers.

With better machining times we have been able to reduce the price despite the increased costs of raw materials and added features to $500.00 for the stripped lower, or $625.00 with either Bushmaster or RRA LPK installed.
Other LPKs are available call for pricing.

A billet upper is in the works that will mate perfectly to these lowers. We hope to have them available in the next few weeks
__________________
Alberta Tactical Rifle Supply

[rivetc78]

A billet upper is in the works that will mate perfectly to these lowers. We hope to have them available in the next few weeks
__________________
Alberta Tactical Rifle Supply

The perfect mating would apply to ALL generations of ATRS Lowers.

I hope we can see them soon. I am finally using my ATRS Lower for a build. It would be nice to use a 'perfectly mated' ATRS Billet upper.

[alberta tactical rifle]

The perfect mating would apply to ALL generations of ATRS Lowers.

I hope we can see them soon. I am finally using my ATRS Lower for a build. It would be nice to use a 'perfectly mated' ATRS Billet upper.

The new uppers fit the Gen 1 and 2 pretty good, better than any other upper will, but being as we created these upper to be a perfect fit for the Gen 3 lowers that is the 1 they will fit the most seamlessly.

[jdman]

love the markings, shocker, peace, and f-you.

[alberta tactical rifle]

love the markings, shocker, peace, and f-you.

That is just 1 of the possibilities, other more politically correct FC marking are available.
We typically use a modified HK style.

[LeeEnfieldNo.4_mk1]

Just a question, would you be able to engrave a standard, non-stylized maple leaf instead of the one you currently have on them (like on our flag)? I am kinda partial to the standard one, although the stylized one does look very nice as well (any maple leaf on a Canadian made product looks excellent in my books)

Also, Will stripped lowers be available? I read on your site that only completed lowers would be shipped.

Thanks.

[alberta tactical rifle]

Just a question, would you be able to engrave a standard, non-stylized maple leaf instead of the one you currently have on them (like on our flag)? I am kinda partial to the standard one, although the stylized one does look very nice as well (any maple leaf on a Canadian made product looks excellent in my books)

Also, Will stripped lowers be available? I read on your site that only completed lowers would be shipped.

Thanks.

To change the marking would require getting a "variation of standard markings" from the CFC. The stylized leaf is our trademark, so I am really not wanting to make a change there.

Stripper lowers ARE available but we suggest having us install the LPK whether you supply it or not so that they can be fitted properly for 100% functionality 1st time.
No offense intended but we have had many claim that assembling an AR is something anyone can do, but we have had a few returned, the owners asking that we fix the fubar they have created by not totally understanding what is entailed.
Also by us supplying the lower with LPK of choice installed, we then guarantee the lower to be fully operational.

[LeeEnfieldNo.4_mk1]

To change the marking would require getting a "variation of standard markings" from the CFC. The stylized leaf is our trademark, so I am really not wanting to make a change there.

Stripper lowers ARE available but we suggest having us install the LPK whether you supply it or not so that they can be fitted properly for 100% functionality 1st time.
No offense intended but we have had many claim that assembling an AR is something anyone can do, but we have had a few returned, the owners asking that we fix the fubar they have created by not totally understanding what is entailed.
Also by us supplying the lower with LPK of choice installed, we then guarantee the lower to be fully operational.

OK, I had no idea you would have to go through some CFC BS just to change the markings, but then again, it is the CFC. And I understand that its your trademark, I was just wondering.

Thanks for your response.