http://www.canadiangunnutz.com/forum...d.php?t=723606
In Association with Black Art Rifle Company (BARC), Mystic Precision will now be able to offer full Custom Rifle and Gunsmithing services.
From Competition F class and Bench Rest rifles, to Precision Tactical/ Varmint and Hunting, to full restoration of classic rifles, and even custom parts and fabrication, there is precious little we can't do.
Offering a wide range of quality products and combining over 40yrs of firearms and machining experience, our goal is to help you build the perfect rifle to meet your every need and budget. All at competitive prices.
If you can dream it up, we can likely build it. Parts and Assembly discount packages are available.
Please send me a PM or email info@mysticprecision.com to discuss your next build.
GENERAL RIFLE WORK: Prices do not include refinishing or parts
Complete install of an aftermarket barrel $250
Wildcat Chamberings available – addn fee for reamer may be required
Cut and Crown Barrel $50
Thread Barrel for Muzzle Brake (does not include the brake) $70
Custom and aftermarket brakes from $65& up
Lapping Bolt Lugs – Does not include barrel set back if headspace is out of spec by this operation (existing barreled action) $50
Threading Bolt handle $60
Custom Bolt knobs from $20&up
Trigger Install – aftermarket triggers only, not included $30
Install recoil pad – pad not included $45
Drill and Tap Receiver – per hole $20
Action Bedding for most factory and aftermarket stocks from $125&up
Action Bedding w/ Pillars from $175&up
Fluting Barrels – Does not include refinishing barrel 6 flutes $150
8 flutes $200
PRECISION ACTION WORK:
BLUE PRINTING - all Commercial Receivers. Includes: $200
Truing and Recutting action threads as needed
Squaring Receiver face as needed
Recutting and lapping bolt lugs to receiver as needed
Bolt Face is Trued as needed
Feed and Function checked to ensure smooth running
*Must be combined with a new barrel install
COMPETITION F CLASS AND BR SET UP – Includes: +$250
All blue printing above and Bolt Shimming using existing bolt
Honing action raceways to fit shimmed or aftermarket bolt
Firing pin hole bushed
We can supply PTG bolts for Rem 700 actions. These are very well made, look much better and will add value to your action.
NOTE: The steps used in the competition preparation may reduce the ability of the action to function when dirty and wet so should be avoided for any rifle that will see inclement conditions.
REFINISHING - HOT BLUING – PRICES WITH FULL RIFLE BUILDS
Matte Finish (bead blast) Bolt actions $150
Lever actions $175
Pump actions $175
Delux Finish (400 grit) Bolt actions $180
Lever actions $225
Pump actions $210
High Luster Finish (polish to mirror finish) Starting from $250
Nitride Bluing for Small parts including surface preparation $60&up
Slow Rust Bluing Barreled Action $300
Action or Barrel each $180
Parkerising Starting from $150
ArmaCoat – matte black Barreled Action $175&up
Other colours and camo patterns possible
FOR REFINISHING ONLY WITHOUT ANY MECHANICAL WORK ADD $50
Bolt Jeweling Starting from $50
CUSTOM PARTS AND MACHINE WORK
Labour $45/hour
Labour and Machining $65/hour