Running out of ideas. The recoil spring can be fixed with a couple boxes of slugs. I wonder if the extractor might be the culprit? Perhaps it needs a look to see if it is doing its job.
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Running out of ideas. The recoil spring can be fixed with a couple boxes of slugs. I wonder if the extractor might be the culprit? Perhaps it needs a look to see if it is doing its job.
Hi guys,
Just want to find out what type of slugs can be used for this shotgun. I have one but not sure what ammo I can use specifically slugs. Please advise.
Thanks
Ron
Considering it's a cylinder bore you could pretty much stuff anything in your shells and it would shoot them just fine.Originally Posted by ronald1203
That being said, rifled slugs should give you the best results.
Very interested as well. I'm having the same problems with light loads. 2.75 00buck and slugs no problem. #7 shot will not eject.
ΜΟΛΩΝ ΛΑΒΕ
Member of the CCFR
Same problem here. Won't cycle anything less than 2 3/4" 00buck n slugs. Sits at back of safe.
Not impressed considering claims from others that It'll eat anything.
Maybe I'll get pissed off enough one day and enlarge the gas ports a smidgen.
I found mine will work with everything except Winchester AA reduced noise/recoil loads for me, but for my son will malfunction almost every shot with standard target loads (everything stiffer is ok)...it has something to do with the way we hold it. Try taking a firmer grip with the lighter loads before you modify...mine worked fine basically right out of the box for me.
In this vid - CHEEP Winchester loads are used...
MOre cheep Winchester being used quickly.
What you see are two three quarter inch 1 ounce 12g #6loads and 1ounce slug hand loads that are used on all 3 semi auto pictured above.
Shot and slug rounds have been chronyed @ only 1150fps using Red Dot powder CCI primers pink Winchester wads.
I can actually go even under 1100fps and the MP-A still cycles flawless.
Last edited by sendmorebrains; 10-27-2013 at 08:28 AM.
C-19 is just the beginning. CGN members must be more vigilant than ever. Protect your privileges or lose them to the ANTIs
just digging your shotguns your 930 is pretty well kitted out where you get some of that stuff .Your optima looks good to! The one in the middle what is it ? also how long is the barrel.I like short barrels interested in knowing more.
Mine has cycled everything with no issue including 1oz reloads of#8
Enjoying your freedom? Thank A Soldier !!!
You say nobody needs an AR15? Well nobody needs a whiny little b*tch either yet here you are!
Did you guyz check that other web site?
There is a guy there that got it to cycle light trap and skeet loads by replacing the magazine tube spring.
"23.Only one sigline picture is allowed, and the height of the picture must be no more than 100 pixels.
http://www.canadiangunnutz.com/forum/faq.php?faq=new_faq_item#faq_cgn_general_rules"
Posting Permissions
Reply With Quote
