http://westrifle.com/wrstore/index.p...index&cPath=20
There is matching numbers left for sale visit by the link I provided.
Al
http://westrifle.com/wrstore/index.p...index&cPath=20
There is matching numbers left for sale visit by the link I provided.
Al
CHECK OUT WEBSITE TODAY. WE ARE ADDING NEW PRODUCTS EVERY DAY.
WWW.WESTRIFLE.COM
http://www.canadiangunnutz.com/forum...d.php?t=437599
Жизнь хороша, если есть ППШ! И совсем без проблем, если есть АКМ
So what happens when your gun comes in and you try it and it jams up every 2 or 3 shots because the pin is preventing the follower from pivoting freely?This rifles are pinned to the follower.
Brno Arms had and still has reputation for extremely talented designers, engineers, their DESIGN - WAY AHEAD OF OTHERS, WAY AHEAD OF TIME, UNCOMPROMIZING QUALITY, ACCURACY, RELIABILITY, OLD WORLD CRAFTSMANSHIP and long LASTING BEAUTY ~Brnomann
You do the same thing myself and several others have done. You take a Dremel and cutoff wheel and cut a little off from the base of the pin where it contacts the follower. Just enough so it can rock back and forth a little. Then a shot of WD-40 and work it until it loosens up a bit. Follow that with some magic marker, paint or cold blue so no one can see any fresh metal and Bob's your uncle.
Should be a thread in the Red Rifles section about it.
"Arm yourself because no one else here will save you." - Chris Cornell
Or just take pliers and wiggle it around a few times that worked for some people
Sergey
CHECK OUT WEBSITE TODAY. WE ARE ADDING NEW PRODUCTS EVERY DAY.
WWW.WESTRIFLE.COM
http://www.canadiangunnutz.com/forum...d.php?t=437599
Жизнь хороша, если есть ППШ! И совсем без проблем, если есть АКМ
Just to chime in, and I hope this helps some on the fence: I must say I did not get mine via WestRifle but mine is pinned to the follower and I have yet to have a feeding issue.
Not all of them do. We know went to old method of pining and that one has no issues at all
Al