Xander Customs
Manufacturer
All designs depicted herein are the intellectual and proprietary property of Xander Customs
All designs depicted herein are the intellectual and proprietary property of Xander Customs
I started writing a book and then realized the pictures speak for themselves.
Price $700 an extra $25 to paint your handguard with armacoat.
The stock is designed to give a good bedding action to the majority of rifles without any additions. That being said, a minority of rifles may require shims. Stainless steel adhesive shims will be included (may be stuck or adhered to the "wings" of the trigger group). Most rifles should not require this.
The Op Rod Guide is made from aluminum but uses threaded steel inserts (as shown in the picture). It puts an optimal and very small amount amount of tension on the barrel and firmly locks into the rifle with 3 bolts. There is no spring pin. This is completely unnecessary.
Set screws at the front of the stock allow a small adjustment of barrel harmonics and prevent barrel whip. This unique design concept is proprietary to me as are all the shapes and concepts of my designs.
There are two drilled and tapped holes above where the buttstock screws in. These are there to accommodate accessories that may become available in the future and to provide an extra mounting point for customers who may wish to do their own customization projects in conjunction with my stock.
Edit:
You can't really see the threaded steel inserts in the picture as everything is painted. They prevent stripping the threads over time if you take your rifle out of the stock every now and then for a deep cleaning. Also, this design provides good repeatability (holding your zero) if you were to take your rifle out of the stock and put it back in.
All designs depicted herein are the intellectual and proprietary property of Xander Customs
I started writing a book and then realized the pictures speak for themselves.
Price $700 an extra $25 to paint your handguard with armacoat.
The stock is designed to give a good bedding action to the majority of rifles without any additions. That being said, a minority of rifles may require shims. Stainless steel adhesive shims will be included (may be stuck or adhered to the "wings" of the trigger group). Most rifles should not require this.
The Op Rod Guide is made from aluminum but uses threaded steel inserts (as shown in the picture). It puts an optimal and very small amount amount of tension on the barrel and firmly locks into the rifle with 3 bolts. There is no spring pin. This is completely unnecessary.
Set screws at the front of the stock allow a small adjustment of barrel harmonics and prevent barrel whip. This unique design concept is proprietary to me as are all the shapes and concepts of my designs.
There are two drilled and tapped holes above where the buttstock screws in. These are there to accommodate accessories that may become available in the future and to provide an extra mounting point for customers who may wish to do their own customization projects in conjunction with my stock.
Edit:
You can't really see the threaded steel inserts in the picture as everything is painted. They prevent stripping the threads over time if you take your rifle out of the stock every now and then for a deep cleaning. Also, this design provides good repeatability (holding your zero) if you were to take your rifle out of the stock and put it back in.
Last edited: