Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: MUZZLE BRAKES - JP Ent, EGW and DPMS/Micalek - NEW ONES ADDED

  1. #1
    Supporting Dealer
    Join Date
    Mar 2004
    Location
    Summerland, BC
    Posts
    16,580

    MUZZLE BRAKES - JP Ent, EGW and DPMS/Micalek - NEW ONES ADDED



    2 NEW BRAKES TO ADD. The one on the left is a DPMS Levang style 1/2X28 thread and bored for the 22cal. $40

    On the right, DPMS Miculek LR308 steel parkerized, 5/8X24 thread, 30cal bore. Includes the lock nut shown $75





    The JP Ent Beenie Coonie brake is massive and wonderfully machined. Available in several sizes, SS and matte (pictured below). Prices range from $110 to $125. I will have this SS one added to my upcoming 7-300WSM project rifle.

    Should be extremely effective at cutting down the recoil. A very impressive piece.

    Yes, I will be able to get the other honking big brake that looks like it came off a howitzer. Costs are $130 to $140



    For those, who want a little more descrete brake for hunting and varmint rifles, the DPMS/Miculek brake is for you (top left). I had this on my 7RM LR hunter and it worked really nicely. $50 and comes with a crush washer.

    Simple effective and well made. 1/2X28 thread so will fit on an AR in a snap.

    Top Right is the EGW Space Comp version. I liked the multiple gills for a different look. 1/2X28 thread. $100.

    I have a few more versions coming.

    Most brakes are bored for the 22cal so will need to be opened up for larger cals.

    I am going to limit the variety offered cause there are just too many to offer. However, if there is a style from one of these manf that you want, let me know and I will see about custom orders.

    Jerry
    Last edited by Mystic Precision; 03-15-2012 at 06:44 PM.


    Check out my Facebook page... Mystic Precision Inc

    Email me at mysticprecision@gmail.com or PM

  2. #2
    CGN Regular mkwn's Avatar
    Join Date
    Apr 2008
    Location
    Montreal
    Posts
    171
    Is it possible to get 14x1lh threads cut into a Jp brake?

  3. #3
    CGN Regular mkwn's Avatar
    Join Date
    Apr 2008
    Location
    Montreal
    Posts
    171
    *on a 22 cal brake

  4. #4
    Supporting Dealer
    Join Date
    Mar 2004
    Location
    Summerland, BC
    Posts
    16,580
    Quote Originally Posted by mkwn View Post
    Is it possible to get 14x1lh threads cut into a Jp brake?
    Not enough to clean up the 1/2x28 thread and recut for a metric that tight.

    Is your barrel threaded now?

    Jerry


    Check out my Facebook page... Mystic Precision Inc

    Email me at mysticprecision@gmail.com or PM

  5. #5
    CGN frequent flyer jt_trouble's Avatar
    Join Date
    Nov 2008
    Location
    KB6
    Posts
    1,573
    Hi Jerry.

    Question ... Top Left Brake .. What is it the OD and OAL on this one? And does/can it come in stainless?

    Last edited by Mystic Precision; 03-01-2012 at 05:26 PM.

  6. #6
    CGN Ultra frequent flyer redshooter's Avatar
    Join Date
    Feb 2009
    Location
    Central Ontario
    Posts
    2,777
    Way to go Jerry!!!!!!!!!!!!!

    The big brake your refering to, is it the JP Recoil Eliminator? If so I'll be in touch in a few months.

  7. #7
    CGN Regular jasonn's Avatar
    Join Date
    Apr 2009
    Location
    Winnipeg, Manitoba
    Posts
    944
    Tagged.

  8. #8
    CGN Regular mkwn's Avatar
    Join Date
    Apr 2008
    Location
    Montreal
    Posts
    171
    Yep I'm looking to put a brake on my Swiss arms cqb.

  9. #9
    Supporting Dealer
    Join Date
    Mar 2004
    Location
    Summerland, BC
    Posts
    16,580
    Quote Originally Posted by jt_trouble View Post
    Hi Jerry.

    Question ... Top Left Brake .. What is it the OD and OAL on this one? And does/can it come in stainless?

    The DPMS/Miculek brake is approx 2 1/16" long and 7/8" is diameter.

    Does not come in SS. What you see is it.

    Very nice brake and great value given the cost.

    Jerry


    Check out my Facebook page... Mystic Precision Inc

    Email me at mysticprecision@gmail.com or PM

  10. #10
    CGN frequent flyer emilio613's Avatar
    Join Date
    Dec 2009
    Location
    Between 4 walls, in front of a screen.
    Posts
    1,780
    I am really liking the DPMS/Miculek...thinking of getting one for my rem700

    I will have to figure out if the taper will meet up well with my barrel. I am not too good with all these techy terms, but you think you could tell me the diameter of the smaller tapered end/tip of the thread barrel facing end? Just so I know if the taper will match up with my rifle, without needing any machining/cutting?

    Thanks!

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •