What gen is that?
What gen is that?
Hello G4C, looking for a GEN3/4 do you have any in stock or for pre order. TY.
Last edited by 1ABNDT; 01-10-2020 at 07:45 PM.
LEST WE FORGET
I Will Not Seal My Fate Without a Fight, If You See Me Running, I Run To The Front.
Member of NFA CCFR CSSA NRA DTOM CATI LEFTY MAFIA
Not in the store right now, had my staff checked and I was told these are gen1 models
G4C GUN STORE
7780 Woodbine Ave Unit 3, Markham, ON L3R 2N7
Shop Online: www.g4cgunstore.com
Fax: +1 (905) 604-8679
Tel: +1 (905) 604-1611
E-Mail: info@g4cgunstore.com
Follow us on : Facebook & Instagram
Ty, G4C.
LEST WE FORGET
I Will Not Seal My Fate Without a Fight, If You See Me Running, I Run To The Front.
Member of NFA CCFR CSSA NRA DTOM CATI LEFTY MAFIA
How much is shipping to Abootsford, BC
IDS Micro Roni kits
Micro RONI Gen 3: Conversion Kit for Glock 17 OR 19
Micro RONI Gen 4: System Glock 17&19 / CZ P07/P09/P10 / Beretta APX
Micro RONI Gen 4X: System for Glock 17&19 / CZ P07/09/P10 / Beretta APX
Gen 3
Measurements
Width Max (cm) : 6.3
Height Max (cm) : 14.5
Length Open Stock (cm): 56.7
Length Folded Stock (cm): 34.8
Weight (grams): 760
**AVAILABLE AS AN SBR OR NON SBR (Brace) according to customer preference.
** The ONLY system that provides a (patented) trigger guard for a safe carrying and use.
SPECIFICATIONS
The Gen 3 Micro RONI® / Micro RONI Stabilizer is the First compact addition to the good old Gen-2 pistol to carbine conversion kit I. This light and sturdy platform Fits EITHER Glocks 19,23,32 OR 17,22,31. The Gen 3 Micro RONI® as all other ORIGINAL Micro Conversion Kits (MCK) arrives with a folding stock for a sturdier position
→ No pistol disassembly required – Just place pistol into the kit and lock
→ Equipped with a long Picatinny rail, allowing a combination of sight, magnifier, and/or night vision
→ Provides two extra Picatinny rails on both right and left for mounting additional accessories
→ Ambidextrous, easy and fast handling
→ Features a right-folding stock for easy concealment and carry
→ Right and left serrated thumb-rests for better control on recoil and muzzle-rise
→ Front extra magazine carrier for fast reload
→ Front integral tactical light (Optional)
→ Fits only Glock gen’ 3+4, including compensated models (17, 19)*
Length Open Stock (cm): 56.7
Length Folded Stock (cm): 34.8
Gen 4
Measurements
Width Max (cm) : 6.3
Height Max (cm) : 14.5
Length Open Stock (cm): 56.7
Length Folded Stock (cm): 34.8
Weight (grams): 880
** Fits Gen 5 Glocks
** Also Available for CZ P07/09 and Beretta APX.
**Features an SBR OR NON SBR (Brace) configuration according to customer preference.
** The ONLY system that provides a (patented) trigger guard for a safe carrying and use.
** Cocking handle remains as an integral part of the system at all times.
SPECIFICATIONS
The Gen 4 Micro RONI® / Micro RONI Stabilizer is the most popular Micro Conversion Kit. This light and sturdy platform Fits BOTH Glocks 19,23,32 & 17,22,31 Including Gen5 Glocks. The Gen 4 Micro RONI® as all other ORIGINAL Micro Conversion Kits (MCK) arrives with a folding stock for a sturdier position
FEATURES:
Captive charging handle – remains within the kit.
No pistol disassembly required – Just place pistol into the kit and lock
Larger and flared ejection port – allows better ejection, especially of weaker ammunition.
Open hatch with access to the pistol’s slide-stop.
New triangular-shaped barrel shroud -Compatible with our “Plus” muzzle accessories, and allows shifting between full and medium-sized Glock pistols ( i.e. Glock 17 to 19)
Compatible with Gen. 5, 4 & 3 Glock pistols.
No pistol disassembly required – Simple drop and lock within seconds.
A long Picattiny rail – Allows combining two devices (i.e. Red-dot, magnifier or NVD).
Two extra right and left Picattiny rails for mounting additional accessories.
Ambidextrous, easy and fast cocking handle.
Optional: Full-Auto ambidextrous cocking handle.
Ambidextrous Cocking Handle, trigger-guard safety, Flashlight Activation and Sling. All designed for both left and right shooters..
A right-folding stock for easy concealment and carry, yet the pistol can be operated (grip, cock and shoot).
Right and left serrated thumb-rests for better control on recoil and muzzle-rise.
Front extra magazine carrier for fast reload. (Not on S&W and Glock 21 models)
Front integral tactical light (Optional).
Gen 4X
Measurements
Width Max (cm) : 6.3
Height Max (cm) : 14.5
Length Open Stock (cm): 56.7
Length Folded Stock (cm): 34.8
Weight (grams): 760
** Fits Gen 5 Glocks Including Glock X versions
** Also Available for CZ P07/09 and Beretta APX. (CZ w/remaovable foregrip. Beretta w/o)
** Features a removable foregrip (See pictures) to comply with the SBR / NON SBR regulations
**Features an SBR OR NON SBR (Brace) configuration according to customer preference.
** The ONLY system that provides a (patented) trigger guard for a safe carrying and use.
** Cocking handle remains as an integral part of the system at all times.
SPECIFICATIONS
The Gen 4X Micro RONI® / Micro RONI Stabilizer is the latest Micro Conversion Kit has different variations to fit the following Gun Models:
Glock X as well as to allow the widest versatility of use (With or Without Fore Grip and With or Without Brace). Fits Glocks 19,23,32 & 17,22,31 Including the Gen5. The Gen 4 Micro RONI® as all other ORIGINAL Micro Conversion Kits (MCK) arrives with a folding stock for a sturdier position
Captive charging handle – remains within the kit.
Larger and flared ejection port – allows better ejection, especially of weaker ammunition.
Open hatch with access to the pistol’s slide-stop.
New triangular-shaped barrel shroud – Compatible with our “Plus” muzzle accessories, and allows shifting between full and medium-sized Glock pistols ( i.e. Glock 17 to 19)
Compatible with Gen. 5, 4 & 3 Glock pistols.
No pistol disassembly required – Simple drop and lock within seconds.
A long Picattiny rail – Allows combining two devices (i.e. Red-dot, magnifier or NVD).
Two extra right and left Picattiny rails for mounting additional accessories.
Ambidextrous, easy and fast cocking handle.
Ambidextrous trigger-guard safety.
A right-folding stock for easy concealment and carry, yet the pistol can be operated (grip, cock and shoot).
Right and left serrated thumb-rests for better control on recoil and muzzle-rise (Optional).
Front extra magazine carrier for fast reload. (Not on S&W and Glock 21 models)
Front integral tactical light (Optional).
→ No pistol disassembly required – Just place pistol into the kit and
→ Features a right-folding stock for easy concealment and carry
→ Right and left serrated thumb-rests for better control on recoil and muzzle-rise
→ Front extra magazine carrier for fast reload
→ Front integral tactical light (Optional)
→ Fits Glocks gen’ 3-5, including compensated models (17, 19)*
The above mentioned are not CAA USA MCK.
Last edited by 1ABNDT; 04-02-2020 at 02:50 PM.
LEST WE FORGET
I Will Not Seal My Fate Without a Fight, If You See Me Running, I Run To The Front.
Member of NFA CCFR CSSA NRA DTOM CATI LEFTY MAFIA
[youtube]JBlmpV3X5Vg[/youtube]
LEST WE FORGET
I Will Not Seal My Fate Without a Fight, If You See Me Running, I Run To The Front.
Member of NFA CCFR CSSA NRA DTOM CATI LEFTY MAFIA