Page 22 of 102 FirstFirst ... 21214151617181920212223242526272829303242 ... LastLast
Results 211 to 220 of 1011

Thread: Wk180-C technical questions & answers only

  1. #211
    Member
    Join Date
    Jun 2018
    Location
    Ontario GTA
    Posts
    65
    removed comment.
    Last edited by Cee-8; 11-09-2018 at 12:05 AM. Reason: Not appropriate for this thread

  2. #212
    CGN Regular Zee705's Avatar
    Join Date
    Jan 2016
    Location
    Northern Ontario
    Posts
    686
    What's the gas block profile? 0.750" ?
    S#it can go south people. The space shuttle blew up twice. - Clint Smith

    Communists aren't people.

  3. #213
    CGN Regular lmar's Avatar
    Join Date
    Jun 2008
    Posts
    769
    Quote Originally Posted by Drift117 View Post
    Yeah I think a possible solution would be to file down a channel for an o-ring maybe even 2. That would tighten up the receiver perfectly.
    No machining necessary - there is a chamfer around the bottom slot that allows for the use of a standard O-ring.

    See

    https://www.canadiangunnutz.com/foru...cheap-solution

    L
    --------------------------------------------------
    "If sense is so common ..... why is it in such short supply?"

  4. #214
    Member Drift117's Avatar
    Join Date
    Dec 2012
    Posts
    98
    Quote Originally Posted by lmar View Post
    No machining necessary - there is a chamfer around the bottom slot that allows for the use of a standard O-ring.

    See

    https://www.canadiangunnutz.com/foru...cheap-solution

    L
    That seems to add upwards pressure on the upper which was what i was trying to avoid. I think having orings on near the top and bottom of the lug would be better because it uses lateral pressure to tighten up the lug. Any upwards pressure causes torque on the disassembly button, upper receiver, and recoil guide base would wear it out eventually.

  5. #215
    CGN Regular lmar's Avatar
    Join Date
    Jun 2008
    Posts
    769
    Quote Originally Posted by Drift117 View Post
    That seems to add upwards pressure on the upper which was what i was trying to avoid. I think having orings on near the top and bottom of the lug would be better because it uses lateral pressure to tighten up the lug. Any upwards pressure causes torque on the disassembly button, upper receiver, and recoil guide base would wear it out eventually.
    Better yet would be a properly sized lug (at least side to side) that wouldn't require a "Fix".

    L
    --------------------------------------------------
    "If sense is so common ..... why is it in such short supply?"

  6. #216
    Member Drift117's Avatar
    Join Date
    Dec 2012
    Posts
    98
    Quote Originally Posted by lmar View Post
    Better yet would be a properly sized lug (at least side to side) that wouldn't require a "Fix".

    L
    XD True

  7. #217
    CGN frequent flyer Bonjour43ma's Avatar
    Join Date
    Nov 2010
    Location
    GVRD
    Posts
    1,029
    What is the distance from the muzzle to the lower tip of the handguard? I'm guessing 5.7" since the barrel is 18.7" and the handguard is 13"? Thinking to fit a barrel shroud on it.

  8. #218
    CGN Regular St Pauli's Avatar
    Join Date
    May 2017
    Location
    Durham region
    Posts
    421
    Can a printable FRT be made available ?

  9. #219
    CGN Ultra frequent flyer
    Join Date
    Oct 2018
    Posts
    2,035
    Quote Originally Posted by St Pauli View Post
    Can a printable FRT be made available ?
    They posted a picture a while back, you should be able print that.

  10. #220
    CGN Regular St Pauli's Avatar
    Join Date
    May 2017
    Location
    Durham region
    Posts
    421
    Took a screen shot with my phone but I'd like a hard copy. No idea how to print the photo though. a pdf file would be nice .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •