2016 Shotgun of the Year: 1919 Match~ BACK IN STOCK!! *GENERATION 2*

[k_h]

Not sure if we mentioned but we got in mag clamps as well now





$29
http://www.tacticalimports.ca/magazi...919-p-449.html

Much more elegant solution than this:

[Tactical Imports]

I just got my 1919 on thursday along with the 3 spare mags and a mag clamp i ordered.

Took it out and put 75 rounds through it, didnt even clean it or wipe it off. Just took it and the mags out of the box and blasted away.

The gun had the light load ring in it when I got it so I started with cheap federal target loads. Not a SINGLE issue with them from the very first shot. ONLY issue I have is ONE of the mags seems to have the feed lips a bit tight, they need to be tweaked. Other than that mag issue thats easily resolved, the gun ran PERFECT.

I tried the Dominion low recoil slugs and they functioned perfectly in the gun as well. I also tried a FEW heavier loads but could immediately see why you shouldn't do that with the light load ring installed. They cycled the gun so hard you could feel it complaining.

I have to say though, first impressions, this gun is absolutely fantastic.

For anyone interested, the sights are metal, not plastic. Mine were TIGHT and didnt come loose during shooting. The hand guard installation nut did rattle a bit loose but it was only hand tight to start with. Ive since tightened it down farther and will see how it stays. it has a detent so it doesnt just rattle right off. Just got loose.

The bolt release is too exposed as many have mentioned. If you set the gun down on the left side with the bolt open, it will almost always close. Not a huge issue for me. The mag release on the other side is fantastic. And I love the forward charging handle.

Im going to do a better review of the gun in the black and green shotgun forum here pretty soon. For now, I though potential buyers would be interested in my initial thoughts. I had a Derya MK10 before this gun, which I liked. But this one is better in ALMOST every way. There is one issue i don't like at all, has nothing to do with actual function of the gun (which is perfect). You HAVE to remove a bolt recessed WAY down the buffer tube to separate the upper and lower... and you HAVE to do this to get the bolt out... and you NEED to get the bolt out cause it gets REAL dirty in and around the bolt if your shooting cheap loads.

FANTASTIC gun. I love it. Best money I've spent in a while.

Thanks for your review!

[scuba_cowboy]

The first batch was awesome

[Armourall]

This - thank you for pointing this out. What is the alloy??

No answer after two pages = no sale.... Thanks for saving me money!!

[Tactical Imports]

How come no one can answer the question - "What are the metal lowers made of - aluminum or cheap meta?" For $100 more - is it worth the extra coin for keeping the POI being that it is heavier for example? What are the benefits of a "metal" lower over the polymer one?

It has been asked at least two times and all the other questions were answered but this one.

Will ask the manufacturer and find out the exact metal specifications on the lower receiver. Judging by the quality on the rest of the gun it is not likely to be cast pot metal

[Tactical Imports]

Lower material is 7075 T6 hardened

[Tactical Imports]

Just placed my order. Cant wait!

Also placed and order, metal lower, 3 spare mags and a mag coupler. I also have one of those "other" 10 round mags that "apparently" fits and feeds in this gun. We will see.

Well, got my order in. Love that you have 2 round hunting mags. Going to ruin some rabbits' day this winter. Hopefully this will be the last gun purchase for a while ... hopefully ...

I ordered one a week ago with 5 mags cant wait to get it hey TI will it still function with the cheep bulk boxes of ammo?

Thanks for your orders!

[Tactical Imports]

Does this one load on a closed bolt? I'd like to use it for ducks and turrs but it would be a pain to only have the use of 2 rounds in the Mag and none in the chamber.

Yup

[TV-PressPass]

Mag clamps? Awe sweet!

[Tactical Imports]

TI: Very interested in the rifle. A few questions:

1. Is the metal lower factory made or made by others and retrofitted later ? What is the material ? Is it the same as the upper ?
2. Are the sights plastic or metal ?
3. How is the warranty handled ?

1. Factory made
2. Metal
3. All warranty claims are through our company