Results 1 to 6 of 6

Thread: Choke threading

  1. #1
    CGN Ultra frequent flyer Butcherbill's Avatar
    Join Date
    Mar 2015
    Location
    Blaster land, Okanagan BC
    Posts
    11,906

    Choke threading

    What are my options for threading a 12.5” Grizzly barrel, i was looking at your website at the barrel threading option and it mentions a thin wall option but there is no link to it. Are you able to thread a grizzly barrel for removable chokes, if so what chokes are they?

  2. #2
    Business Member badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    15,444
    Quote Originally Posted by Butcherbill View Post
    What are my options for threading a 12.5” Grizzly barrel, i was looking at your website at the barrel threading option and it mentions a thin wall option but there is no link to it. Are you able to thread a grizzly barrel for removable chokes, if so what chokes are they?
    thin wall is the only option, but i wont attempt is on the Chinese bbl, as they are really ever in spec and with how thin it is, its to much of a risk
    sorry

  3. #3
    CGN Ultra frequent flyer Butcherbill's Avatar
    Join Date
    Mar 2015
    Location
    Blaster land, Okanagan BC
    Posts
    11,906
    No worries Simon, I figured it might be the case.

  4. #4
    CGN Regular slim123's Avatar
    Join Date
    May 2009
    Location
    Gateway to the Rockies
    Posts
    434
    Hear ya man, chokes on a shortie shotgun is exactly what they all need.........unfortunatly the chinese are only copiers.....and have no sense of innovation or foresight.....seems to be a no brainer to install chokes from factory....but its about exactly what to expect the chinese to put to market

    by the way Simon, any chance of you carrying or being able to source a buffer stock/grip adapter plate for a 14" "factory choked" Fabarm SDASS Martial?
    Last edited by slim123; 02-17-2019 at 04:39 AM.
    "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

  5. #5
    CGN Ultra frequent flyer Butcherbill's Avatar
    Join Date
    Mar 2015
    Location
    Blaster land, Okanagan BC
    Posts
    11,906
    Quote Originally Posted by slim123 View Post
    Hear ya man, chokes on a shortie shotgun is exactly what they all need.........unfortunatly the chinese are only copiers.....and have no sense of innovation or foresight.....seems to be a no brainer to install chokes from factory....but its about exactly what to expect the chinese to put to market

    by the way Simon, any chance of you carrying or being able to source a buffer stock/grip adapter plate for a 14" "factory choked" Fabarm SDASS Martial?

    Some runs of early Grizzly’s had chokes from the factory, they all should as far as I’m concerned.

    This will allow you to use any 870 stock on a fabarm, look at the Mesa Tactical LEO buffer kit if you’re looking for an M4 stock. It’s rock solid, alternatively you could see if TSE has a factory fabarm collapsible stock.

    https://sjhardware.com/product/fabarm-knoxx-adaptor/

  6. #6
    CGN Regular slim123's Avatar
    Join Date
    May 2009
    Location
    Gateway to the Rockies
    Posts
    434
    Quote Originally Posted by Butcherbill View Post
    Some runs of early Grizzly’s had chokes from the factory, they all should as far as I’m concerned.

    This will allow you to use any 870 stock on a fabarm, look at the Mesa Tactical LEO buffer kit if you’re looking for an M4 stock. It’s rock solid, alternatively you could see if TSE has a factory fabarm collapsible stock.

    https://sjhardware.com/product/fabarm-knoxx-adaptor/
    awesome...thanks for the tip

    had a knoxx recoil reducing stock years ago, worked great ..wife and kids liked it....but i found it was just a bit too much muzzle jump.....after got a mesa buffer stock with grip slot, and i put a mesa hydraulic buffer tube....now that was really awesome...sold it a year or so back...regretted ever since and really want to get another

    ty for the link
    "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •