- Location
- Southwestern Ontario
9 X .32 Calibre 0 Buck pellets in 3 layers of 3
Winchester AA Hull (I used the Handicap grey ones - thanks to shooting buddy Mitch for these!)
Federal 209A primer
WAA12 Wad (I used Claybusters CB1118-12 replacement)
24.5g Universal Clays (MEC *32 bushing)
This provided for a much more manageable recoil than the benchmark Federal 12-pellet #00 Buck load. Group at 10m was under 6 inches out of my 12/5 inch Scorpion PA-01 pump action whereas the Federal load was all across an 18 inch target at the same distance. Spread at 15m was just over 12 inches and 18 inches at 20m, which I listed as the maximum effective range. No feeding issues.



Winchester AA Hull (I used the Handicap grey ones - thanks to shooting buddy Mitch for these!)
Federal 209A primer
WAA12 Wad (I used Claybusters CB1118-12 replacement)
24.5g Universal Clays (MEC *32 bushing)
This provided for a much more manageable recoil than the benchmark Federal 12-pellet #00 Buck load. Group at 10m was under 6 inches out of my 12/5 inch Scorpion PA-01 pump action whereas the Federal load was all across an 18 inch target at the same distance. Spread at 15m was just over 12 inches and 18 inches at 20m, which I listed as the maximum effective range. No feeding issues.





















































