- Location
- victoria bc
Cant seem to find one locally, does anyone you a good supplier of this type of tap and die set??
let me know
thx
matt
let me know
thx
matt
1/2x28 unef tap and die set
- Thread starter matty86suk
- Start date
Tried KBC Tools?
They have a branch in the Lower Mainland.
They will work fine for cleaning up threads, but the chances of getting threads straight enough to be useful from scratch, are somewhat slim. Best to use a lathe to cut the threads.
Cheers
Trev
They have a branch in the Lower Mainland.
They will work fine for cleaning up threads, but the chances of getting threads straight enough to be useful from scratch, are somewhat slim. Best to use a lathe to cut the threads.
Cheers
Trev
Most industrial suppliers can order you one. It's generally not a stock item. I went online to look for a new one, and there was a tap and die place in Ottawa that had them listed. I paid about $50 for the last one (tap only) Brownells did have them listed, but when I was looking I couldn't find one.
- Location
- North-Central Quebec
I got mine from KBC Tools. Some comps are sold with that size thread. I start the barrel threads on a lathe and finish them with that set.
Last edited:
