10/22 - shortest barrel possible with hogue overmolded stock

[QuickDraw16]

Been scouring the forum for pictures or answers with no luck. Will a 12.5” barrel reach past the fore-end?

 

[KaneZoR]

That’s a Dlask 12.5” barrel in a hogue stock.

Oops corrected the picture

 

[duncansuds]

There are 8.5’s and 9.5’s out there. Likely shorter. Measure your stock and buy one. Check out Dlask. I’m sure others know many more brands.

 

[QuickDraw16]

There are 8.5’s and 9.5’s out there. Likely shorter. Measure your stock and buy one. Check out Dlask. I’m sure others know many more brands.

If I had the stock that would be an idea...

 

[jacotsmith]

I had a 12.5" barrel in a Hogue stock and if I recall correctly the barrel just barely peeped out past the forend.

If you haven't tried here yet, this thread will likely have a photo of what you are after, maybe even one of mine (though I don't recall for sure).

https://www.canadiangunnutz.com/forum/showthread.php/695507-10-22-photos-post-em-up-here!

 

[357Maximum]

12.5 " barrels will clear the forend by about an 1" or so

 

[spyderchop]

Thats 16.5 inch barrel in above picture

 

[QuickDraw16]

Thats 16.5 inch barrel in above picture

Sure looks like it to me too.

 

[regulate34]

How dose that 12.5” feel.
I just ordered a 16.5 Dlask
Kinda felt the 12.5 would feel funny. But never tried one.

 

[rmsg0040]

Here's my 12.5 with dlask compensator

IMG_20210430_122144396 by Gopes Ram, on Flickr

 

[Blackcats]

I have a FabSport 11.5 " in a Ruger Paddle Boat stock , about 1/2 in clrarance . I know , worthless without pics !

 

[Ravage]

I have the thumb hole over mold stock and 8" with a muzzle device would clear the front of the stock or a straight 10" non threaded barrel

https://www.hogueinc.com/media/cata...139433887a97daa66f/2/0/2040059029.800x800.jpg