10-22 upgrades

THESEUS

THESEUS

CGN frequent flyer
Rating - 100%
1   0   0
Location
saskatchewan
What are definite upgrades I should still do?

So far I've replaced the stock into the Magpul X22 which I love

I replaced the extractor last week to the Volq version


My list of upgrades are still -Trigger, bolt, and barrel


Should I just send my .22 to Dlask and let them upgrade lol
 
I did the bolt buffer,automatic bolt release and hammer (both volquartsen parts) and Magpul x22 stock.

Didn't do the full trigger, the hammer was sufficient to change the trigger feel to my taste.

I will eventually change the barrel to a .920 but for now it's not in the cards.

My 10/22 is my fun plinking rifle so no need for it to be more accurate, I have a bolt action CZ455 for accuracy
 
Scotchbrite inside of reciever
Polish bolt
Polish firing pin and profile for better primer ignition
Auto bolt drop mod
Trigger group polish and lightening
Trigger overtravel screw

All of those are great improvements to the stock parts
 
For me the most noticeable mods that changed accuracy were the trigger job, and the Kidd 20 inch stainless heavy barrel.
Try to get some decent glass with Adjustable Objective.
Bushnell Elite 6500 2.5-16 x 50 & Sightron S-tac 4-20 x 50 are worth looking into IMOHO.
 
Last edited:
I have an order in with Dlask right now myself. Ordered a kidd extractor, firing pin, bolt buffer, charging handle with spring set, and the trigger job kit. I’m going to do the auto bolt release mod and maybe use some polish compound on the bolt and inside the receiver. I have a distributor exclusive sporter version that I bought for the stock so will keep that. Keeping the stock barrel as it’s just for plinking and don’t want a heavy bull barrel on there.
Happy shooting.
 
You must log in or register to reply here.
Back
Top Bottom