11mm rimfire rigs for CZ 452/513???

[mlehtovaara]

Just wondering where the best place to get some durable 11mm rimfire rings is?

I want to mount a Leupold vx1 rimfire 2-7x28 on my cz 513 if anyone has a height recommendation.

Thanks in advance.

 

[rodregier]

I went with the Leupold 54234 11mm "high" (0.477) rings for my CZ452 Silhouette model.

At least one of the site sponsors lists them as stock:

http://frontierfirearms.ca/index.php/optics/scope-mounts/leupold-rimfire-11mm-rings-high-gloss.html

 

[mlehtovaara]

The leupold is only a 28mm lens so curious if i need the high rings to clear the rear sight?

 

[hometownhero]

I have burris signature high on mine. Had mediums but the bold handle was hitting the scope

 

[horseman2]

You will probably need medium rings so the bolt handle will clear your power ring.

I have the Leupold 11 mm medium ring mounts on my 452 American with a Leupold Rifleman 4 - 12 x 40

 

[hometownhero]

I hear warne 7.3 the 722 rings work well. There is also talley

 

[kamlooky]

Height would depend on the size of the occular piece?

 

[hometownhero]

Height would depend on the size of the occular piece?

And the bolt handle.

 

[regulate34]

I went with adapters to a weaver mount. Found it a lot easy to get the heights I wanted. I found a lot of company's say 11mm and 3/8". But I found I didn't like the fit.

 

[rodregier]

The eyepiece bell on the scope I used is fairly large. The Leupold VX-1 2-7x28mm .22 Caliber Rimfire Rifle Scope has a modest size eyepiece bell, you might get away with the medium #54231
to clear the bolt handle.

 

[ronnie01]

http://www.rimfirecentral.com/forums/showthread.php?t=336921

Some info here

R

 

[FLHTCUI]

http://www.rimfirecentral.com/forums/showthread.php?t=336921

Some info here

R

Great Info there Ronnie !!!
Thanks for sharing some seriously valuable information.
But, I will add in my experience with CZ Rimfires is no two guns I have bought/shot where the same for ring mounting.
One can be 3/8'' dovetail and the other will be 11mm dovetail.
It can be maddening the first time or two, but eventually one will become accustomed to this minor oddity, especially when the dam thing shoots so fine with cheap
AE HP bullets.
Tight Groups,
Rob

 

[hometownhero]

Great Info there Ronnie !!!
Thanks for sharing some seriously valuable information.
But, I will add in my experience with CZ Rimfires is no two guns I have bought/shot where the same for ring mounting.
One can be 3/8'' dovetail and the other will be 11mm dovetail.
It can be maddening the first time or two, but eventually one will become accustomed to this minor oddity, especially when the dam thing shoots so fine with cheap
AE HP bullets.
Tight Groups,
Rob

Cz states that the new 455 are all 11mm.

 

[lowe160]

It normally and I will say it again it was normally only the American that had the 3/8" dovetail. The rest were 11mm but who knows with a CZ, can't have everything! lol

Wayne

 

[calvados.boulard]

This should sort out any confusion: www.diproductsinc.com/products.aspx?CAT=4268

Thanks,
Cal.

 

[boomer49]

I've had steel Talley rings on my 1972 Anschutz 64 sporter (sold as a CIL 310) with the 11 mm dovetail for several years ... holding a Leupold Ultralight 3x9 EFR. Awesome combination ...

 

[swervinmervin]

My Talleys don't fit my 453 american... is this due to it being a 3/8 dovetail instead of 11mm? Let me clarify, they fit the dovetail, but don't tighten up on my scope (M8x4 Leupold)...
Phoned Talley, 453 American uses 3/8 dovetail, proper rings are in the mail

 

[cal_h]

http://www.egwguns.com/other-scope-m...l-scope-mount/



just used this rail to put a nikon prostaf 2-7x32 shotgun hunter on my scout

luck
cal