11mm Rings for a CZ 452? Where to buy 'em?

[mikeystew]

Can someone tell me where i can find true 11mm, 1" med or high rings for my CZ 452? Im looking for something quality, but not too ($$$) quality. Steel would be best, but i could settle for a set of aluminum.

 

[Grizzlypeg]

Isn't 11mm the sort of 3/8" ring that CZ's use? If so, I've used Leupold 3/8 rings, they work, but don't engage the dovetail fully. I've also used Talley's and they fit deeper into the dovetail. Talley's are more expensive, but better, not that I've had a problem with the Leupolds. You can get the Leupolds at many places, like Wholesale Sports, you can get the Talley's at Prophet River.

 

[stubblejumper]

CZ uses either 11mm or 3/8" rings, depending on the model. You do want to use the correct size ring.

 

[GD7]

I've got a low profile 11mm to Weaver adapter coming in the mail. If it fits properly, I'm never going to use 11mm rings again - the choices are too limited, and finding "just the right height" is tedious.

 

[mikeystew]

I just got a set of those adapters from a CGNer... looks like just the ticket.

 

[Epoxy7]

I use Warne 7.3/22 rings for my Walthers. It has both 11mm and 3/8". You flip the base piece depending on the grove. They look like mini Leupold PRW rings. Look and work very well.

 

[southerner]

I've got a low profile 11mm to Weaver adapter coming in the mail. If it fits properly, I'm never going to use 11mm rings again - the choices are too limited, and finding "just the right height" is tedious.

what company makes these ?

i have been looking for 11mm for my weatherby/anschutz as well so this is good info

thanks guys

 

[mikeystew]

what company makes these ?

i have been looking for 11mm for my weatherby/anschutz as well so this is good info

thanks guys

h ttps://www.jnpgunsprings.com/index.php?cPath=10

Prophet river also sells a very nice one piece adapter but it's a bit rich for my blood.

 

[super7]

I'm using hawke rings on my cz's (for 3/8 or 11mm). Fit great and are a decent quality ring. Got them on ebay. Paid about $25 shipped.

 

[freezer filler]

Leupold makes nice steel rings which fit 11mm perfectly, flattop(cz) or arched(anschutz). I put those on my cz scout. I put a Bsquare 11mm to weaver adapter on my varmint with a pair of burris signature zrings...the most rock solid setup I could find. rimfire central has a chart for cz owners to help determine proper height and ring setups.

 

[kamlooky]

My experience with putting 3/8's rings/bases on a CZ 452 American looks like this.



I have tried numerous brands and they all look almost identical to this photo.
The dovetail on this rifle is between 12mm to 13mm.
Forget exactly, but closer to the 13mm side.
Using 3/8" rings looks to me Buhbubbee.
Only my opinion though.
For those of you that may be interested, I have a spare set of Millet High
steel rings laying on the bench in the oops box.
New and tried on loosely.
Too high for my optics.
Cheers.

 

[Got Juice?]

Recknagel. They make rings specifically for the CZ and your ONLY choice if your optic has a 30 mm tube.

 

[dizzy]

Mikey, talley makes everything you need and they ship fast. a little pricey, dl air guns has a great selection of bkl rings and other cheaper rings which will work fine. The rail on the scout is 11mm. If you want real cheap leupold makes aluminum rings that work just fine and tear up a twenty dollar bill only.