12.5 Grizz upgrades, Post your pics!
- Thread starter mp5k
- Start date
Knoxx stock, and Rem 870P foregrip
The foregrip was really tight to install. Had to put some sandpaper on a dowel and open it up a bit.
Annother shot with mag coupler couple I had lying around. Had to put in some longer screws.
Not sure how well the top round in the second mag will stay in under recoil.
Two mags and 10 Rnds get kinda heavy!
Gas Can
The foregrip was really tight to install. Had to put some sandpaper on a dowel and open it up a bit.
Annother shot with mag coupler couple I had lying around. Had to put in some longer screws.
Not sure how well the top round in the second mag will stay in under recoil.
Two mags and 10 Rnds get kinda heavy!
Gas Can
Last edited:
- Location
- Halifax, NS
So far I have only been able to attach my sling, but in the mail are a left side sling adaptor, some screws for the base an a Millet 30mm red dot.
Other thing Im thinking about buying is a Mesa low tube/leo adaptor with Magpul OD green furnature, with a Fab Defence railed fore end and a Magpul AGF angled foregrip, OD green.
We'll see how much $$ I have after xmas...
Other thing Im thinking about buying is a Mesa low tube/leo adaptor with Magpul OD green furnature, with a Fab Defence railed fore end and a Magpul AGF angled foregrip, OD green.
We'll see how much $$ I have after xmas...
So far I have only been able to attach my sling, but in the mail are a left side sling adaptor, some screws for the base an a Millet 30mm red dot.
Other thing Im thinking about buying is a Mesa low tube/leo adaptor with Magpul OD green furnature, with a Fab Defence railed fore end and a Magpul AGF angled foregrip, OD green.
We'll see how much $$ I have after xmas...
[/QUOTE
OOPs, you pull the wrong pin in that last pic.....
BigGreenMachine
Regular
- Location
- Newfoundland
How much for the magfed? Wheres the thread?
- Location
- Halifax, NS
Haven't even gotten around to cleaning mine yetWhat product did you guys use?
I just poured boiling hot water on all the metal parts after stripping it down. Then wiped the grease off with a rag and applied oil.
Haven't even gotten around to cleaning mine yet
Power drill with bore brush hooked up in the chuck. Bit of gun oil afterwards.
Always goes bang if I don't load mud and dirt caked shells into the tube.
As for mods, everything internal stock, generic pistol grip fore grip and Command Arms M4 stock & happy cap when sling isn't attached.
My Griz is probably one of those most shot Griz 12.5's out there, got it soon as the second batched arrived in Canada and I'm at over 10k rounds through it with nothing replaced. Not even the mag tube follower.
Looking at scope options for the gun next.
Can hit at distance with short barrel no problem with practise, I shoot this gun as far as I do a Mosin M44. 150-200 yards and still hit man sized objects with my ghost ring sights.
Kinda want another one to be honest.......or get the semi auto.
- Location
- Halifax, NS
Does the mag ever jam? was thinking about replaciing the flimey orange one provided.
Canada Ammo has them, click the banner up top.
CanAm has 12.5" barrel......
- Location
- Halifax, NS
Nice forened, where'd ya get it?
Don't care that much. I had that thing for years, don't feel like patterning a new barrel. Besides, one of my buddy has a 12.5 too, so I can use either if I "need" it for whatever reason.
Brownells
$60, but I see they are out of stock for them right now.
http://www.brownells.com/.aspx/sid=53383/sku/Rem_870_Triple_Rail_Forend
Power drill with bore brush hooked up in the chuck. Bit of gun oil afterwards.
Always goes bang if I don't load mud and dirt caked shells into the tube.
As for mods, everything internal stock, generic pistol grip fore grip and Command Arms M4 stock & happy cap when sling isn't attached.
My Griz is probably one of those most shot Griz 12.5's out there, got it soon as the second batched arrived in Canada and I'm at over 10k rounds through it with nothing replaced. Not even the mag tube follower.
Looking at scope options for the gun next.
Can hit at distance with short barrel no problem with practise, I shoot this gun as far as I do a Mosin M44. 150-200 yards and still hit man sized objects with my ghost ring sights.
Kinda want another one to be honest.......or get the semi auto.
im looking at a 12.5 and a 14" build at the moment, similar to yours.. why do i need 2 short shotgun ? ... why dont i need 2 !?
