14.5 " BBL with fsb help

[thaeffman]

Are there any Canadian dealers that offer factory 14.5 inch AR barrels with pinned fsbs??. Wanted to ask before I went the gunsmith/custom route any help would be appreciated.

 

[hbean]

Wolverine Supplies has a few DD 14" FSB barrels in stock

 

[thaeffman]

Thank you for pointing me in the right direction I'll give them a call.

 

[Rebel Rouser]

Most DD barrel don't have a FSB.

 

[hbean]

Most DD barrel don't have a FSB.

I guess these must be something new from DD or perhaps a Wolverine Supplies exclusive

https://www.wolverinesupplies.com/P...-Mid-Length-Govt-14-5--with-FSB-5-56mm-Barrel

https://www.wolverinesupplies.com/P...e-14-5--M4-Profile-5-56-Barrel-w-A2-Gas-Block

 

[Rebel Rouser]

I guess these must be something new from DD or perhaps a Wolverine Supplies exclusive

https://www.wolverinesupplies.com/P...-Mid-Length-Govt-14-5--with-FSB-5-56mm-Barrel

https://www.wolverinesupplies.com/P...e-14-5--M4-Profile-5-56-Barrel-w-A2-Gas-Block

You notice how there is no taper pins in the FSB...

Look at the uppers they sell. None have a FSB.
https://danieldefense.com/upper-receiver-groups.html

 

[CanAR15]

You notice how there is no taper pins in the FSB...

Look at the uppers they sell. None have a FSB.
https://danieldefense.com/upper-receiver-groups.html

They have taper pins....both the FSB and low pro gas blocks. The pictures are just not showing them.

You're looking in the wrong area....look under "barrels".
https://danieldefense.com/cold-hammer-forged-barrels.html?barrel_length=36&caliber=6

I guess these must be something new from DD or perhaps a Wolverine Supplies exclusive

https://www.wolverinesupplies.com/P...-Mid-Length-Govt-14-5--with-FSB-5-56mm-Barrel

https://www.wolverinesupplies.com/P...e-14-5--M4-Profile-5-56-Barrel-w-A2-Gas-Block

Nothing new....DD has been selling just barrels for a long time.

 

[CanAR15]

Wolverine Supplies has a few DD 14" FSB barrels in stock

Got a 14.5" pinned FSB M4 profile from WS a while ago....