150ttsx in 300 win mag for moose

[savagelh]

Does anyone think that's too light of a bullet? I was going to try some over top of h4350. I should get around 3200fps or thereabouts. I don't see the need to go up to 180s in a mono bullet. Has anybody used these on moose?

 

[tony d]

I've used this that bullet successfully on moose and elk in a 300 win I found 7828
To give me the best load
Cheers Tony

 

[buckbrushoutdoors]

ttsx shine went you go lighter for caliber. if you recover a bullet I would be shocked. I'm shooting the 130gr ttsx in my 300 win mag it like a hot knife through butter

 

[savagelh]

Good to hear thanks. I do have some 7828 on hand but I want something temp insensitive. The weather in moose season here could be +30 or -30. I've hunted them in both. Might try 7977 too but I read h4350 is one of the most temp stable and I have some on hand.

 

[Bustercluck]

I'm planning on running 150 grain mono bullet for the wife to run in her 300 wsm. I picked up some solid nosler e-tip for now, but I'll probably end up with Barnes. The plan is h4831sc, but that might change too.

 

[Bustercluck]

If I were buying for myself I'd probably look for something in the 165 grain range.

 

[2bore]

Many moose have been taken with much less. Unless you are hunting elephants, I think anything 300win mag would be just fine haha

 

[Gatehouse]

That's what I use

 

[Bluedevil25]

150gr TTSX out of a 300 Win Mag would be an excellent load for Moose.

 

[Underthegun]

I use the 150 TTSX in my sons 300wsm. It's his do everything load.

 

[MRP]

30-30 150gr and thousands of moose. Why wouldn't it work? Distance and your shooting ability are the only real factors.

 

[c-fbmi]

I hunted one hunt in Africa with 150 gn TTSX in my 300 Wby @ 3500 fps, it was a killing SOB with outstanding penetration.........it will work just wonderful on moose in a 300 WM...........drive it as hard as you can, the faster you drive them the better they kill.

 

[savagelh]

That's what I was thinking cfbmi. Thanks for your input. I hope to get as close to 3300fps that I safely can.

 

[Gatehouse]

That's what I was thinking cfbmi. Thanks for your input. I hope to get as close to 3300fps that I safely can.

Should be easy. I get almost that speed from a 300WSM. The WM has a bit more capacity.

 

[saskcop]

That would be a perfectly fine load for moose. The bullet is certainly tough enough - so drive it as hard as you can.