What is your barrel length?I've only reloaded 88ELDm so far, Hornady brass & CCI450 mag primer
StaBALL 6.5, Viht N550, RL15.5ts, RL16, even RL26 with great accuracy
I have a pile of 62gr ELDvt and will try them with faster burn rate powders like LVR, CFE223, StaBALL Match, Varget, N140
How is this different from the 22 ppc? - dan
BR has the same bolt face measurement as the 308, apparently this has a slightly smaller than ppc bolt face. But not as small as the 223. Shoulder is a little bit forward compared to the ppc, so a little more case capacity looks like (after I posted I went and looked at the case drawings). Another cartridge designed to work best in the AR platform and magazine restrictions. I'll have to go see if there's any difference in case capacity between it and the 22 BR. - danOr 22 BR?
Anyone seeing excessive case growth with this?
22 & 6 Arcs are necked down 6.5 Grendel’s . Brs are std bolt face cartridges ans hold more powder .
Early BRs were slow twists and shot a lot of 68 grers
Now guys are using the 6 BR in F Class with FAST 1-7 to 1-8 twist barrels and deep throating them and shooting 105 -109 bullets !
Arcs are like the Ppcs but have fast twist barrel with deep throating for long heavy for caliber bullets ! 80 -109 gr
Very EFFICIENT cartridges![]()
Anyone seeing excessive case growth with this?