Does anyone have,know, or printed any strips of .22 LR ammo holder strips that can be screwed or attached to the side of a receiver or stock by screws or other. Have some fabric elastic ones but they stretched and shells fall out. ---Dieseldog!
22LR ammo holder straps?
- Thread starter dieseldog
- Start date
buzzmagoo
CGN Ultra frequent flyer
- Location
- sprucewood Hallows Eastern Townships
Go to your local hard ware store and look at the screw driver bits some come in a plastic type cartridge holder .some even have belt loops on the ends might be worth a look if you don't find any thing else . Many moons ago when I shot competition 22 , the rifles we used ( single shots) had something like what you are looking for . A ten rounds holder on the side of the for stock it might have been aluminum.
So never mind my ideas, just happen to come across one of them for mentioned bit holder and tryed a 22 cartridge in it , the cartridge almost fell all they threw it! So it's a no go, it would have been perfect 10 holes.
So never mind my ideas, just happen to come across one of them for mentioned bit holder and tryed a 22 cartridge in it , the cartridge almost fell all they threw it! So it's a no go, it would have been perfect 10 holes.
Last edited:
I thought there was a nicer one but something like this?
https://www.nordicmarksman.com/In-Line-Spare-Shell-Holder.html
https://www.nordicmarksman.com/In-Line-Spare-Shell-Holder.html
buzzmagoo
CGN Ultra frequent flyer
- Location
- sprucewood Hallows Eastern Townships
Some body with a 3d printer could wip you up one I bet .
Black packing foam( the kind with memory) cut a strip and punch some hole in it with an empty 22 case, black duct tape it up on the sides for strength and to help hold its shape double sided tape it to the stock .
Black packing foam( the kind with memory) cut a strip and punch some hole in it with an empty 22 case, black duct tape it up on the sides for strength and to help hold its shape double sided tape it to the stock .
- Location
- Blaster land, Okanagan BC
A holder for individual .22lr ammo or a holder for a .22lr mag? I’m sure you could make something for single rounds with a drill press and some Teflon strips, like from a cutting board. Then cut self adhesive Velcro strips to attach it to your rifle, if it’s for mags then 12g shell loops will fit a .22 magazine. The stretchy ones are what I use, works well.
I like it except the price as I'm in the market for three or four and need more capacity as carrying several types of ammo around farm and barnyard while working with an d single shot. Thanks Dieseldog!
