243 load

[drum]

Does anyone have a good load for 90 grain 243

 

[RL-300mag]

IMR-4831 some where's between 41gr to 44.5gr's with a 90gr pill would be a start , & I bet you would fined a keeper....

Cheer's & play safe...

 

[Betty-Lou]

Never used 90gr before but 95 gr Ballistic Tips with 34.0gr of Varget and CCI BR-2. My son used this load to take Mule deer, Whitetail deer, black bear and Mountain goat. All 1 shot, except the goat was 2 shots at 450 yards.

 

[AP]

I would use this ...I have Sako 90gr factory that shoots pretty well -- some say that they use Vihtavuori powder .. some say no.....but I would start here:
http://www.vihtavuori.com/en/reloading-data/rifle-reloading/-243-winchester.html

 

[dfarrell]

I use 44.0g of H4350 with 90g scenars

 

[sunray]

Been using 40.5 of IMR4350 with Speer FMJ's for eons. You must work up the load for your rifle though.

 

[c-fbmi]

I used Speer 90 gn flat base, by the thousands, for decades in my 243s and always found IMR 4350 to give me very good velocities and superb accuracy. Then I got a deal on several thousand 80 gnrs and still found IMR 4350 to be the ticket both accuracy and velocity wise. As far as the actual loads go that is up to each individual rifle and I don't publish my loads. I use several different brands of brass but keep them all segregated, using mostly W-W and IVI now.