257 wby starting load
- Thread starter Ruger007
- Start date
.257
I have done extensive load development with the .257 weath over the years and have found that this load works best , My accumark is a tack driver at 100 yds with this load as well as a couple other .257's i have tryed it in , save your self a lot of development time and use this.
Barnes tsx 115 gr
cci 250 large mag rifle primer
Imr 7828 69.0 gr
I have done extensive load development with the .257 weath over the years and have found that this load works best , My accumark is a tack driver at 100 yds with this load as well as a couple other .257's i have tryed it in , save your self a lot of development time and use this.
Barnes tsx 115 gr
cci 250 large mag rifle primer
Imr 7828 69.0 gr
Hornady !!
That is with the hornady bullet from the barnes manual with the 115 TSX its fine i have not had any pressure issues.
That is with the hornady bullet from the barnes manual with the 115 TSX its fine i have not had any pressure issues.
.257
I have allways stuck with the Weatherby brass , its a bit pricey but i have found its good quality brass and worth the price.
I have allways stuck with the Weatherby brass , its a bit pricey but i have found its good quality brass and worth the price.
If you want load data go here,www.reloadersnest.com
john-brennan
CGN frequent flyer
- Location
- Vancouver Island B.C.
257
Get a reloading manual!!!!! then you have a reference point for different powders, cause you may not find an accurate load the first time around. R22, 7828, and I find Retumbo fantastic with bullet weights of 110-120gr.
Get a reloading manual!!!!! then you have a reference point for different powders, cause you may not find an accurate load the first time around. R22, 7828, and I find Retumbo fantastic with bullet weights of 110-120gr.
