2A Harris Bipod adapter in Canada?
- Thread starter ton45-II
- Start date
I bought one from a company in Canada, but the search mechanism on CGN has gone to pot recently. Maybe it is just me, but something is wrong, because I couldn't find any of my posts. If you can search on my name and bipod or harris, you should find it.
EDIT
Found it on my 4th try:
http://w w w.shooterschoice.com
I'd avoid using the drainage hole as its the thinest area of the stock and if you want reinforce it from inside you dont have much more free space cause the gaz system wont fit! A bipod there is a bunch of stress on the stock
you should instead remove the swivel and use one of these holes (drilling it a bit if necessary) because it gets thicker down there
you should instead remove the swivel and use one of these holes (drilling it a bit if necessary) because it gets thicker down there
I do. I went with the first rivet hole closest to the receiver. I stayed away from the weep hole because the rivet hole has already been inletted and it just took a bit more filing to widen it to fit the head of the 2A adapter. Since I reconnected my sling to the bipod, I never needed the swivel at all. Fabsports has posted a pic of a bipod mount that resembles the 2A, however it fills in both rivet holes. Now that it is available, I would have gone that route.
You can see here that I just epoxied the adapter into the stock. Please excuse the ironning board....
