30/06 load info ??

[profesional 111]

I am shooting 150 gr ttsx barnes . 1:10 twist . 24 inch barrel .

Any favorite recipies for this that seam to work with decent velocity might make my life easier trying to narrow down where to start.
Thanks .

 

[Suther]

Do you have any powders on hand already?

 

[The Outsider]

It just so happens that I worked up a load recently for my Remmy 700 BDL in 30'06 with the same bullet.

My load is 55.5 gr Reloader 15.

COAL 3.430

Well over 2900 fps

Very accurate.

 

[profesional 111]

OK cool i have reloader 15. maybe try that. Also some H4895.

 

[Ariu]

I load them using rl17. My load is hot at about 59gn. You can start at 55 and work up.

 

[bearhunter]

57.0 grains of W760/H414 over CCI Magnum primers, under 150 ttsx = 2900 fps

61 grains of H4831 over CCI Magnum primers, under 150 ttsx = 2850 fps

Both are very accurate out of my Antonio Zoli model 1900 with 24 in bbl x 1-10 twist rate.

Velocities are appx averages from my magnetospeed

 

[mbogo3]

150gr TTSX out of a T3 2949fps /IMR4895 -51gr/Win brass...........1/2" group at 100 yards.Floors moose/bear +deer.