300 m/yd targets

[Papaclaude]

What do you guys use as 300 yd targets? Is there an internet site that has them. I've checked targetz.com and a few other sites, but haven't found anything specific.

 

[Bolivar]

Try the DCRA website. They have dimensions somewhere with various official target dimensions.

I have drawn up a 300 yard target based on this in Cadd. I can send you a pdf if you send me a PM with your email.

The target fits on a 30 inch piece of paper I seem to recall, you would have to take it to print shop for engineering/architectural prints unless you have another source.

 

[maynard]

You could always call the DCRA office that is at Connaught Ranges in Ottawa and ask about buying some. They should have a good stock of DCRA 300 yard faces with 300 yard and 300m wear centers. You might even be able to purchase 300m ISSF target faces there too.

 

[maynard]

h ttp://dcra.ca/permanent%20links/DCRA%20Target%20Price%20List.pdf

DCRA 300 yard target faces are $2.00 each and wear centers are .40 cents each.

ISU targets are $2.00 and the centers are $1.00. Sounds cheap if you ask me, I doubt you could get them printed for that price.

 

[Bolivar]

Maynard is probably right about the price. I can't print the full size targets at work for that little I don't think

 

[ryandpahl]

8.5"x11" sheet of paper with a big X does just fine at 300. 1 gallon milk jugs are pretty easy to hit. Clay pigeons are good. Eggs are a great challenge.

 

[sunray]

Go here, pick one(the Lee Large Target will do) and have fun. http://www.reloadbench.com/pdf.html

 

[Norma]

If you dont need to see your grouping, get cheap ceramic tile's on special, or left overs from a project, their a blast to shoot that far, you know when it's a hit.

 

[sgt.rock]

http://www.gunnersden.com/index.htm.free-300-yard-bullseye-target.html
They list targets for all ranges on the left side column

 

[msg.drew]

Post it notes are perfect size

 

[subneural]

Post it notes are perfect size

I use 8-inch "orange peel" bullseye targets out a 300yds. I don't have a spotting scope so these make it easier to track my performance.

http://www.battenfeldtechnologies.com/caldwell/catalog.asp?family=Orange-Peel-Sight-In

 

[CyaN1de]

I like this one for 300m Testing
http://www.reloadbench.com/pdf/files/200 yd Load Development Target.pdf