300 PRC which action

Surprised that no one has mentioned the cadex r7 actions, they seem like a great action, with some brilliant design features.
I'm about to put a 30" 1:9 ibi, fluted m40 onto one.
 
My KS Arms 3 lug barreled action in 300 PRC showed up and WOW is it sure nice. I assembled the rest of the rifle and after a couple final small adjustments to fit me I should be shooting it in the next week.
 
hawk-i said:
What loads is it liking?
Click to expand...

Only loaded 225 eldm's with H1000 and F215M's, ADG brass so far. Best was 77.7 grains. Trying to get more rounds down it before too much fine tuning. Did a pressure/velocity test and ran it up to 78.9 grains, and 2960 fps. No heavy bolt lift or extractor marks.
 
Shot my best group ever a couple days ago with this rifle, .147 moa @100. 77.9 H1000 with a 225 eldm .040 off going 2950. Testing out further next, hope it holds that accuracy.
 
Ntv69 said:
That's pretty impressive. Curious to see how it holds up. What is your cleaning method?
Click to expand...

For break in I did the one shot clean for the first 10, then twice a 3 shot and clean, haven't cleaned it since. I'm just over 100 rounds total, with half of those reduced loads to get one firing on the brass, and several shots with 1/2 grain increments doing a pressure test. I have only shot a handful of different loads and a few seating depths to end up where I'm at.
 
Bit of an update on this rifle. It sped up a bit after being fully broken in. Dropped my load down to 77.4 grains of H1000 going 2960. Set up the G7 BR2 rangefinder and verified at distance. First shot hits within a couple inches of aim point at 600, 777, 875, and 945 yards. Like hitting the easy button, will be looking to go much further and also test groups at those ranges.
 
You must log in or register to reply here.
Back
Top Bottom