300 Weatherby w/Nosler e-tip?

[DRD]

I'm going to loading up a few of these to try (180Gr.).
Anyone else have a load for these? Doesn't seem to be a lot of info our there. I will probably use IMR7828 since I have quite a bit of it.
One thing I noticed is that these bullets are quite long and will have to be seated quite deep to get to COAL. I shoot a Model 70 and there does seem to be quite a bit of "free bore". Any experience in seating these out a bit further?

 

[accumark]

300 wby

I have never used those e-tips but do use swift scricco 11 they are about the same I am shooting them out of a weatherby Accumark using the same powder I have no problems. I can look up my load data if you want shots well under 1" at a 100 yards, send me a message and I can forward the data Jim.

 

[Northman999]

I bought some for my 270.

Nosler told me to just go ahead and work up a load using generic data for bullets the same weight. I'm pretty sure their website says this too.

 

[Dunk]

Scircco 11 and e-tips are no way the same.

 

[SR80]

For e-tips nosler says to start at the min load and not exceed the mid load. and .050-.100 from the rifling

 

[reb]

I have used the 180 gr e-tip in my 300 ultra mag.I am very happy with the overall performance.Inside the box of bullets there is a note that says to start at min.and work up.I have taken a couple of elk and a decent W.T.
Good Luck

 

[X-fan]

I can't see a better powder than 7828.
RL-22 or good old H-4831 are good backup positions.

Bring your cleaning equipment to the range.
No personal experience here, but reliable sources (todbartel) tells me those things foul bad (BAD!).