300 wsm 180 accubond H4350

[scott_r]

My manuals only list IMR 4350...Anyone running a 180 accubond with H4350 or can give me a pic via PM of their manual with a 180 gr load. Can't believe Nosler doesn't list this.

Cheers!!

 

[supernova]

You'll have to pull down your combo but Hodgdon has the data you need.
ht tp://www.hodgdonreloading.com/data/rifle

 

[Dogleg]

Hodgdon has it at 64 grains max. and 2950.

As it happens H4350 and 180 Ballistic Tips and Accubonds is my load for my Kimber 300 WSM. Reason I mention that is I cant get anywhere near 64 grains, mine maxes out at 61 grains. I do get the 2950 fps though, with 3 grains less powder. Working up over a chronograph might not be a bad idea.

 

[scott_r]

Thanks guys..

I wonder why H4350 isn't listed in their manuals?? Ive heard alot of guys use it in 300 wsm's

 

[Dogleg]

They often seem to miss my favorite powders. Leaves me jumping back and forth between Hodgdon and Nosler a bit. Cross referencing is good anyway.

I suppose Nosler is more about all their bullets with a little of everyone's powder and Hodgdons is about all their powders with a little of everyone's bullets.

 

[vanisland diver]

If you're not stuck on using H4350 i would try Hodgdon 100V. Im using 62.3 gr with the 180 accubonds and getting good groups and decent speeds, around 2950 fps. and thats out of my tikka .300wsm...

 

[Thumbsmachine]

Very similar here as well. IMR4350, Berger Otb tac 185 gn, my Tikka likes 60.5gn load. Great groups. 3 under a quarter at 100 fair regular. I don't have seat depth data, but I could get that....