.32 SW long loading data?

V

Vic

Member
Rating - 100%
15   0   0
Location
GTA
I'm going to start reloading of 32cal SW long ($21 for box of 50 seems not fair to me). Liman's catalogue has nothing.
Could you suggest a good data source for that?
Where is the best deal for brass/bullets/primers?
Thanks
 
"...Liman's(sic) catalogue has nothing..." Look in a loading manual, not the catalogue. My old Lyman 45th Edition manual has data for it with cast bullets only. So does the Lyman Pistol and Revolver manual.
A net search will turn up lots of data as well. Hogdon's page has data. As does the reloadersnest.com page.
Brass and bullets may be a problem though. It uses a regular small pistol primer with .310" to .313" bullets. The brass is out there, but you may be looking at a special order from your local shop. If their distributors have any. Midway lists Remingtom brass at $99.99US per 1000, Starline at $110.99US per 1000 and Lapua at $235.99US per 1000. So at least it's still being made. Contact Epp's first.
 
Thanks a lot for information, but I'm interested in load data for 32 ammo to be used in target pistols like Pardini HP (or Walther GSP), when the bullet is fully immersed into case (and apparently needs less powder then the usual load with extended bullet). And that situation is not described in MANUALS.
 
Last edited:
Canadian BDX sells 100 gr HBWC for $47.00/1000 which is just what you need, just add the www to the link below. Speer also makes a 98 gr HBWC, I have Speer's number 12 manual and if you PM me your e-mail address I will scan the reloading data and send it to you.

http:// .canadianbdx.com/
 
You must log in or register to reply here.
Back
Top Bottom