375 Winchester bullets

[HChammer]

What are the best bullet (and powder for that matter) for reloading 375 Winchester?

Thanks,
Luke

 

[Ganderite]

I use RL7 and 220 Hornady. 2200 fps

 

[HChammer]

I use RL7 and 220 Hornady. 2200 fps

Ganderite, how far south of north bay are you?

 

[Eagleye]

Barnes makes a Jacketed softpoint, specifically for the 375 Winchester [.375"] in 255 grain weight.
It is an excellent bullet, and works great using 3x grains of H322. Dave.

 

[jethunter]

I like heavier bullets for 38-55 and .375 win, 250gr or higher. Either variety of 4198 powder is good.

 

[greatwhite]

I use 200 gr sierra and 4198 powder. However it is difficult to find bullets or brass right now. I have about 100 rounds of brass and only 50 rounds of 200 gr FN. If you know where I can find any additional bullets I would love to know.

 

[WhelanLad]

i been using Hard Cast coated projies in my 375BB, we only really have hornady 220gr FN down under, Hawksbury river cast bullet co makes a 255gr which im using now. only at 38-55 speeds tho, 1800fps

 

[BlackRam]

The options were the 220 gr Hornady and the 200 gr Sierra.
Both are extremely hard to find.
Luckily I acquired enough of each plus brass when I came across it over the years, so I am good for my needs at this time.
I have primarily used IMR 4198 with the Hornady's to date. Need to work up a load with the Sierra's now.

On the plus side, HSM is making 375 Win ammunition loaded with the 200 gr Sierra bullet. Picked up a few boxes last year, but have not tried them in my rifles yet. Reasonably priced (but still not cheap) compared to the run of Winchester ammo that was produced last year.