mactroneng
CGN Ultra frequent flyer
- Location
- SW Ontario
Forward: I am newer to reloading.
One of the biggest things I like about the Loadmaster is the case feeder. I find it very tedious to hand load/unload cases and while I still do so for trimming/deburring (which I don't do on the press), I will use the press as a single stage for decapping & sizing 357 mag & 38 SPL cases (the only rounds I loaded until recently). I have spare turrets and have one turret set up only with a decapping/sizing die so I just load up the case feeder and go nuts until it's empty (priming system is left empty and sized cases just work their way through the empty stations until they are ejected).
I recently started loading 500 S&W magnums and the first thing I realized is that the cased do not fit through the case feeder or through the tubes (and not in the collator with the tubes inserted). I tried checking Thingverse and didn't find anything. Just wondering if anybody knows if someone has done this before, or done something similar where I could take the file and modify the model to be large enough for the 500 S&W cases.
Thanks.
One of the biggest things I like about the Loadmaster is the case feeder. I find it very tedious to hand load/unload cases and while I still do so for trimming/deburring (which I don't do on the press), I will use the press as a single stage for decapping & sizing 357 mag & 38 SPL cases (the only rounds I loaded until recently). I have spare turrets and have one turret set up only with a decapping/sizing die so I just load up the case feeder and go nuts until it's empty (priming system is left empty and sized cases just work their way through the empty stations until they are ejected).
I recently started loading 500 S&W magnums and the first thing I realized is that the cased do not fit through the case feeder or through the tubes (and not in the collator with the tubes inserted). I tried checking Thingverse and didn't find anything. Just wondering if anybody knows if someone has done this before, or done something similar where I could take the file and modify the model to be large enough for the 500 S&W cases.
Thanks.
