blaser.306
CGN Regular
- Location
- Saskatoon , Sask
Does any-one have a load for 452aa using.45 cal. 200 gr swc cast I have several lbs of this powder that I would love to burn up on the out-door range this summer but no data using lp primers!!!!!!
452 aa
- Thread starter blaser.306
- Start date
Look in Speer manual #11 or older, there is data there I believe. - dan
A suggested load I was given for .45ACP 200gr. cast SWC using 452AA was 5.3gr. for 870fps., to 5.4gr. for 887fps..
Hogden's #23 Manual shows loads using Trap 100 (their powder - same as 452AA) and 200gr. cast of 4.2gr. for 740fps. , to 5.2gr. for 834fps..
I also was given a 6lb. can of 452AA which is destined for my 45ACP and 9mm. this summer.
Regards, DaveF.
Hogden's #23 Manual shows loads using Trap 100 (their powder - same as 452AA) and 200gr. cast of 4.2gr. for 740fps. , to 5.2gr. for 834fps..
I also was given a 6lb. can of 452AA which is destined for my 45ACP and 9mm. this summer.
Regards, DaveF.
