590a1 mossberg

[chev_ranger]

i have a 590a1 and it will only half #### and i have taken it apart and found that the interupter is jamming on the slid block and was wondering the best way to fix the problem if there is a way to stone the block or the interupter or if i need to get new parts if anyone can give me some info that would be great thank you

 

[hoochie]

take it apart again.

the elevator should be level with the magazine tube
insert the bolt
take the forestock and slide it in
line up the notch on the arms of the forestock with the slot on the bolt, and make sure that the slide inserts into the bolt ( the square button on the bottom of the slide should fall into the rectangular slot on the bolt)
insert the interupter/ retainer bars
insert the trigger group
insert the pin.
half #### the shotgun
insert the barrel
screw the cap on.
rack it.

should be good to go.

 

[chev_ranger]

i have had it apart a few times and have put it together a few times this is the first time i have hade problems but i will try it again but like i said it will half #### but thats it i have taken i apart since and see were it is jamming on the interuptor and i dont understand why its has worked flawless since i have bought it till now

 

[chev_ranger]

ok i got it working the interupter had a goudge out of it so i was able to stone it out and now it works fine again thank you for the advise